These instructions help you connect the twinaxial cable.
- If installed, lift the back cover and remove it from the server.
- Look at card positions C05 and C06 on the back of the server. Locate
the position that contains card 2746. This is your twinaxial adapter card.
If both positions contain card 2746, then select the card in position C06.
- Locate the 8-port twinaxial attachment cable (PN 21F5093). Attach
the cable to the connector on the 2746 twinaxial adapter card.
- Connect a twinaxial cable from the workstation that you will be
using as the system console to port 0 on the 8-port twinaxial attachment cable.
Note: The workstation address of your console must be set to 0. To set
the address, refer to the reference material that was shipped with your workstation.
- Continue with the next task.