Performance data files: QAPMDIOP

This database file contains storage device (disk) IOP file entries.

It lists the fields in the storage device IOP file. Consider the following information in these fields:

Field Name Description Attribute
INTNUM Interval number: The nth sample database interval based on the start time specified in the Create Performance Data (CRTPFRDTA) command. PD (5,0)
DTETIM Interval date (yymmdd) and time (hhmmss): The date and time of the sample interval. C (12)
INTSEC Elapsed interval seconds: The number of seconds since the last sample interval. PD (7,0)
IOPRN IOP resource name. C (10)
DIIOP Reserved C (1)
DITYPE IOP type. C (4)
DIIDLC Idle loop count: The number of times the disk controller IOP ran an idle loop. This is done when the IOP has no work to perform. This count is used with the idle loop time. PD (11,0)
DIIDLT Idle loop time: The time (in hundredths of microseconds) to run the idle loop once. PD (11,0)
DITPDK Total packets transferred. PD (11,0)
DIKBYO Total KB transmitted from the IOP to the system across the bus. PD (11,0)
DIKBYI Total KB transmitted to the IOP from the system across the bus. PD (11,0)
DIOPSR OPSTART bus unit message received from another bus unit using normal flow. PD (11,0)
DIOPSS OPSTART bus unit message received from another bus unit using reverse flow method 2 (always 0). PD (11,0)
DISGLR Signals received. PD (11,0)
DIOPST OPSTARTs sent. PD (11,0)
DISGLS Signals sent. PD (11,0)
DIRSTQ Restart queues sent. PD (11,0)
DIRQDO DMA requests sent for output of data: The number of requests the IOP sends to the system for data to be sent from the IOP to the system across the bus. PD (11,0)
DIRQDI DMA requests sent for input of data: The number of requests the IOP sends to the system for data to be sent to the IOP from the system across the bus. PD (11,0)
DIBNAR Occurrences of BNA received. PD (11,0)
DIRID0 Reserved C (8)
DISMP0 Reserved PD (11,0)
DIQLN0 Reserved PD (11,0)
DINRQ0 Reserved PD (11,0)
DIRID1 Reserved C (8)
DISMP1 Reserved PD (11,0)
DIQLN1 Reserved PD (11,0)
DINRQ1 Reserved PD (11,0)
DIRID2 Reserved C (8)
DISMP2 Reserved PD (11,0)
DIQLN2 Reserved PD (11,0)
DINRQ2 Reserved PD (11,0)
DIRID3 Reserved C (8)
DISMP3 Reserved PD (11,0)
DIQLN3 Reserved PD (11,0)
DINRQ3 Reserved PD (11,0)
DIRID4 Reserved C (8)
DISMP4 Reserved PD (11,0)
DIQLN4 Reserved PD (11,0)
DINRQ4 Reserved PD (11,0)
DIRID5 Reserved C (8)
DISMP5 Reserved PD (11,0)
DIQLN5 Reserved PD (11,0)
DINRQ5 Reserved PD (11,0)
DIRID6 Reserved C (8)
DISMP6 Reserved PD (11,0)
DIQLN6 Reserved PD (11,0)
DINRQ6 Reserved PD (11,0)
DIRID7 Reserved C (8)
DISMP7 Reserved PD (11,0)
DIQLN7 Reserved PD (11,0)
DINRQ7 Reserved PD (11,0)
DIRID8 Reserved C (8)
DISMP8 Reserved PD (11,0)
DIQLN8 Reserved PD (11,0)
DINRQ8 Reserved PD (11,0)
DIRID9 Reserved C (8)
DISMP9 Reserved PD (11,0)
DIQLN9 Reserved PD (11,0)
DINRQ9 Reserved PD (11,0)
DIRIDA Reserved C (8)
DISMPA Reserved PD (11,0)
DIQLNA Reserved PD (11,0)
DINRQA Reserved PD (11,0)
DIRIDB Reserved C (8)
DISMPB Reserved PD (11,0)
DIQLNB Reserved PD (11,0)
DINRQB Reserved PD (11,0)
DIRIDC Reserved C (8)
DISMPC Reserved PD (11,0)
DIQLNC Reserved PD (11,0)
DINRQC Reserved PD (11,0)
DIRIDD Reserved C (8)
DISMPD Reserved PD (11,0)
DIQLND Reserved PD (11,0)
DINRQD Reserved PD (11,0)
DIRIDE Reserved C (8)
DISMPE Reserved PD (11,0)
DIQLNE Reserved PD (11,0)
DINRQE Reserved PD (11,0)
DIRIDF Reserved C (8)
DISMPF Reserved PD (11,0)
DIQLNF Reserved PD (11,0)
DINRQF Reserved PD (11,0)
Note: The performance monitor reports I/O processor (IOP) statistics different beginning with Version 3 Release 7. Therefore, performance statistics for IOPs introduced in Version 3 Release 7 or later releases are reported in the QAPMMIOP file. Performance statistics are reported in the QAPMMIOP file even if the IOP supports only one of the three IOP functions (communications, disk, or local workstation). Performance statistics for IOPs that were introduced before Version 3 Release 7 will continue to be reported in the appropriate IOP file (QAPMCIOP, QAPMDIOP, QAPMLIOP, and QAPMMIOP).