For mipsn32 (TARGET_ABI32=y, TARGET_LONG_BITS=64):
abi_ulong = uint32_t (4 bytes) — for pointers and ABI-sized fields
target_ulong = uint64_t (8 bytes) — for general-purpose registers
linux-user/elfload.c allocates target_elf_prstatus using the
mips64/target_elf.h definition where target_elf_gregset_t has
target_ulong reserved[45] (8 bytes each, 360 bytes total).
However, in linux-user/mips64/elfload.c, #include "target_elf.h" inside
the included mips/elfload.c resolves to mips/target_elf.h (compiler
searches the file's own directory first), where the union uses abi_ulong
reserved[45]. For mipsn32 this gives 4-byte entries (180 bytes), not
the 8-byte entries (360 bytes) that elfload.c actually allocated.
Writing via r->reserved[34] therefore lands at byte offset 34*4=136
instead of the correct 34*8=272, silently zeroing the EPC in the core
file.
Fix by casting the pointer to target_ulong * so writes always use 8-byte
slots and land at the offsets matching the allocated layout.
This does not change behavior for mips64 (N64) where abi_ulong already
equals target_ulong (both 8 bytes).
Signed-off-by: Matt Turner <mattst88@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
mips64/elfload.c uses #include "../mips/elfload.c" to share code. When
the compiler processes mips/elfload.c the quoted #include "target_elf.h"
resolves relative to the including file's directory, so it picks up
mips/target_elf.h instead of mips64/target_elf.h. mips/target_elf.h
pulls in mips/target_ptrace.h, whose target_pt_regs has a pad0[6] field
before regs[]. As a result elf_core_copy_regs writes:
r->pt.regs[i] -> reserved[6+i] (shifted by 6 from the correct index)
r->pt.cp0_epc -> reserved[40] (correct mips64 N64 index is 34)
The Linux kernel and glibc both use the mips64 N64 layout (no pad0): EPC
at reserved[34]. Debuggers and libunwind reading the core with N64
constants therefore see a completely wrong register set — EPC points to
GP, RA holds the branch target instead of the link address, etc.
Fix by:
- Guarding the mips32 elf_core_copy_regs in mips/elfload.c with #ifndef
TARGET_MIPS64 so it is not compiled for mips64/mipsn32 targets.
- Providing a mips64-specific elf_core_copy_regs in mips64/elfload.c
that writes directly to r->reserved[i] with the correct N64 indices,
bypassing the struct field names that are tainted by the wrong header
include.
The mipsn32 (TARGET_ABI_MIPSN32) and mips64el targets are covered by the
same mips64/elfload.c and benefit from the same fix.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Linux/MIPS enables software fixups for user-mode unaligned scalar
accesses by default through MIPS_FIXADE/TIF_FIXADE. QEMU linux-user did
not model that ABI, so MIPS guests took fatal AdEL/AdES exceptions unless
translation was forced to use unaligned host accesses.
Key MIPS translation blocks on the linux-user unaligned policy, implement
sysmips(MIPS_FIXADE) to toggle that policy, and raise SIGBUS/BUS_ADRALN
when fixups are disabled.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20260520172313.23777-4-philmd@linaro.org>
Implement the MIPS_ATOMIC_SET sysmips command as an aligned 32-bit atomic
exchange in target memory.
MIPS reports syscall errors through a separate register, so successful old
values can overlap the errno range. Write the return value and error flag
directly and return -QEMU_ESIGRETURN so the common syscall path leaves the
registers unchanged.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20260520172313.23777-3-philmd@linaro.org>
Add the target sysmips dispatcher and implement MIPS_FLUSH_CACHE as a
successful no-op for linux-user.
Self-modifying code is handled by QEMU's normal user-mode translation
invalidation machinery, so the target ABI only needs the syscall command
to be accepted.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20260520172313.23777-2-philmd@linaro.org>
PowerPC was the one outlier that defined both ELF_ARCH and
ELF_MACHINE; ELF_ARCH was defined incorrectly, necessitating
the definition of elf_check_arch.
However, the elf file header field in question is called
e_machine, so ELF_MACHINE is in fact the better name.
Mechanically change most target/target_elf.h files,
then adjust ppc/target_elf.h manually.
Do not provide a default for ELF_MACHINE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make use of the fact that target_elf_gregset_t is a proper structure.
The target_ulong type matches the abi_ulong/abi_ullong
selection within mips64/target_elf.h.
Drop ELF_NREG, target_elf_greg_t, and tswapreg.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the target_pt_regs structure from target_syscall.h.
Fix the incorrect ordering of the fields.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move elf_core_copy_regs to elfload.c.
Move HAVE_ELF_CORE_DUMP, ELF_NREGS, target_elf_gregset_t to target_elf.h.
For now, duplicate the definitions of target_elf_greg_t and tswapreg.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass in CPUState; define HAVE_ELF_BASE_PLATFORM.
Since this was the only instance of ELF_BASE_PLATFORM, go ahead and
provide the stub definition for other platforms.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename from cpu_get_model to emphasize that this is an elf-specific
function. Declare the function once in loader.h.
This frees up target_elf.h for other uses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare to split the main linux-user/elfload.c.
Create empty files for each target, and add the common build rule.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the various open_cpuinfo functions into new files.
Move the m68k open_hardware function as well.
All other guest architectures get a boilerplate empty file.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.
Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do
not support these options rather than pass them on to the host.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from
linux/arch/parisc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offsets (6000 for n32 and 5000 for n64) from the file to
the Makefile.objs to be passed to syscallhdr.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-18-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and
TARGET_PR_SET_FP_MODE. These values are essentially copied from
linux kernel header include/uapi/linux/prctl.h.
This is done in a way consistent with a similar case of
aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and
TARGET_PR_SVE_GET_VL.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Synchronize content of linux-user/mips/syscall_nr.h and
linux-user/mips64/syscall_nr.h with Linux kernel 4.18 headers.
This adds 9 new syscall numbers, the last being NR_io_pgetevents.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
