When we updated Arm and AArch64 board types to mark them for the
target_machine_typename() filter, we forgot about the "x-remote"
machine type, which meant that it disappeared from the set of board
types exposed on the qemu-system-arm and qemu-system-aarch64
binaries. We didn't notice this, because although we have a
functional test for it, it requires the KVM accelerator and we don't
run the functional tests on an AArch64 host in CI.
Mark the machine as being OK to expose in qemu-system-arm and
qemu-system-aarch64, in the same way we do for the "none" machine
type. This fixes a check-functional failure on aarch64 host, where
it would otherwise fail with:
qemu-system-aarch64: unsupported machine type: "x-remote"
Cc: qemu-stable@nongnu.org
Fixes: eb796c5551 ("hw/core: Allow ARM/Aarch64 binaries to use the 'none' machine")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20260507194728.2034696-2-peter.maydell@linaro.org
Guard the unregister by checking whether the listener callback was
set, which only happens right before registration.
Cc: jag.raman@oracle.com
Fixes: c7d80c7c1d ("multi-process: Associate fd of a PCIDevice with its object")
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Use error_setg_errno() instead of passing the value of strerror() or
g_strerror() to error_setg().
The separator between the error message proper and the value of
strerror() changes from " : ", "", " - ", "- " to ": " in places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20251121121438.1249498-14-armbru@redhat.com>
Acked-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Move RAMBlock functions out of ram_addr.h and cpu-common.h;
move memory API headers out of include/exec and into include/system.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VFU_OBJECT_ERROR() reports the error with error_setg(&error_abort,
...) when auto-shutdown is enabled, else with error_report().
Issues:
1. The error is serious enough to warrant aborting the process when
auto-shutdown is enabled, yet harmless enough to permit carrying on
when it's disabled. This makes no sense to me.
2. Like assert(), &error_abort is strictly for programming errors. Is
this one? Vladimir Sementsov-Ogievskiy tells me it's not. Should we
exit(1) instead?
3. qapi/error.h advises "don't error_setg(&error_abort, ...), use
assert()."
This patch addresses just 3. It adds a FIXME comment for the other
two.
Cc: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250923091000.3180122-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[FIXME comment added, commit message adjusted accordingly]
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Currently, we just always pass NULL as errp argument. That doesn't
look good.
Some realizations of interface may actually report errors.
Channel-socket realization actually either ignore or crash on
errors, but we are going to straighten it out to always reporting
an errp in further commits.
So, convert all callers to either handle the error (where environment
allows) or explicitly use &error_abort.
Take also a chance to change the return value to more convenient
bool (keeping also in mind, that underlying realizations may
return -1 on failure, not -errno).
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[DB: fix return type mismatch in TLS/websocket channel
impls for qio_channel_set_blocking]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Memory pull request for 10.0
v2 changelog:
- Fix Mac (and possibly some other) build issues for two patches
- os: add an ability to lock memory on_fault
- memory: pass MemTxAttrs to memory_access_is_direct()
List of features:
- William's fix on ram hole punching when with file offset
- Daniil's patchset to introduce mem-lock=on-fault
- William's hugetlb hwpoison fix for size report & remap
- David's series to allow qemu debug writes to MMIOs
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZ6zcQBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbL3wEAqx94NpB/tEEBj6WXE3uV9LqQ0GCTYmV+
# MbM51Vep8ksA/35yFn3ltM2yoSnUf9WJW6LXEEKhQlwswI0vChQERgkE
# =++O1
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 13 Feb 2025 01:37:04 HKT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [full]
# gpg: aka "Peter Xu <peterx@redhat.com>" [full]
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'mem-next-pull-request' of https://gitlab.com/peterx/qemu:
overcommit: introduce mem-lock=on-fault
system: introduce a new MlockState enum
system/vl: extract overcommit option parsing into a helper
os: add an ability to lock memory on_fault
system/physmem: poisoned memory discard on reboot
system/physmem: handle hugetlb correctly in qemu_ram_remap()
physmem: teach cpu_memory_rw_debug() to write to more memory regions
hmp: use cpu_get_phys_page_debug() in hmp_gva2gpa()
memory: pass MemTxAttrs to memory_access_is_direct()
physmem: disallow direct access to RAM DEVICE in address_space_write_rom()
physmem: factor out direct access check into memory_region_supports_direct_access()
physmem: factor out RAM/ROMD check in memory_access_is_direct()
physmem: factor out memory_region_is_ram_device() check in memory_access_is_direct()
system/physmem: take into account fd_offset for file fallocate
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We want to pass flags into qio_channel_tls_readv() but
qio_channel_readv_full_all_eof() doesn't take a flags argument.
No functional change.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Accel & Exec patch queue
- Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander)
- Add '-d invalid_mem' logging option (Zoltan)
- Create QOM containers explicitly (Peter)
- Rename sysemu/ -> system/ (Philippe)
- Re-orderning of include/exec/ headers (Philippe)
Move a lot of declarations from these legacy mixed bag headers:
. "exec/cpu-all.h"
. "exec/cpu-common.h"
. "exec/cpu-defs.h"
. "exec/exec-all.h"
. "exec/translate-all"
to these more specific ones:
. "exec/page-protection.h"
. "exec/translation-block.h"
. "user/cpu_loop.h"
. "user/guest-host.h"
. "user/page-protection.h"
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t
# wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt
# KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K
# A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8
# 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe///
# 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r
# xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl
# VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay
# ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP
# 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd
# +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6
# x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo=
# =cjz8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Dec 2024 11:45:20 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits)
util/qemu-timer: fix indentation
meson: Do not define CONFIG_DEVICES on user emulation
system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header
system/numa: Remove unnecessary 'exec/cpu-common.h' header
hw/xen: Remove unnecessary 'exec/cpu-common.h' header
target/mips: Drop left-over comment about Jazz machine
target/mips: Remove tswap() calls in semihosting uhi_fstat_cb()
target/xtensa: Remove tswap() calls in semihosting simcall() helper
accel/tcg: Un-inline translator_is_same_page()
accel/tcg: Include missing 'exec/translation-block.h' header
accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h'
accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h'
qemu/coroutine: Include missing 'qemu/atomic.h' header
exec/translation-block: Include missing 'qemu/atomic.h' header
accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h'
exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined
target/sparc: Move sparc_restore_state_to_opc() to cpu.c
target/sparc: Uninline cpu_get_tb_cpu_state()
target/loongarch: Declare loongarch_cpu_dump_state() locally
user: Move various declarations out of 'exec/exec-all.h'
...
Conflicts:
hw/char/riscv_htif.c
hw/intc/riscv_aplic.c
target/s390x/cpu.c
Apply sysemu header path changes to not in the pull request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
Directly invoking the DeviceClass::reset method is a bad idea,
because if the device is using three-phase reset then it relies on
transitional reset machinery which is likely to disappear at some
point.
Reset the device in the standard way, by calling device_cold_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240813165250.2717650-7-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The remote_object_set_fd() passes @errp to error_prepend(), and as a
PropertyInfo.set method, its @errp is so widely sourced that it is
necessary to protect it with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
CONFIG_ALL is tricky to use and was ported over to Meson from the
recursive processing of Makefile variables. Meson sourcesets
however have all_sources() and all_dependencies() methods that
remove the need for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
event_notifier-posix.c is registered in meson's util_ss[] source
set, which is built as libqemuutil.a.p library. Both tools and
system emulation binaries are linked with qemuutil, so there is
no point in including this source file.
Introduced in commit bd36adb8df ("multi-process: create IOHUB
object to handle irq").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606134913.93724-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The printed offset value is prefixed with 0x, but was actually printed
in decimal. To spare others the confusion, adjust the format specifier
to hexadecimal.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clarify the behavior of TYPE_VFU_OBJECT when TYPE_REMOTE_MACHINE enables
the auto-shutdown property. Also, add notes to VFU_OBJECT_ERROR.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
pci_bus_irqs() coupled together the assignment of pci_set_irq_fn and
pci_map_irq_fn to a PCI bus. This coupling gets in the way when the
pci_map_irq_fn is board-specific while the pci_set_irq_fn is device-
specific.
For example, both of QEMU's PIIX south bridge models have different
pci_map_irq_fn implementations which are board-specific rather than
device-specific. These implementations should therefore reside in board
code. The pci_set_irq_fn's, however, should stay in the device models
because they access memory internal to the model.
Factoring out pci_bus_map_irqs() from pci_bus_irqs() allows the
assignments to be decoupled, resolving the problem described above.
Note also how pci_vpb_realize() which gets touched in this commit
assigns different pci_map_irq_fn's depending on the board.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-5-shentey@gmail.com>
[PMD: Factor out in vfu_object_set_bus_irq()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The legacy function qdev_reset_all() performs a recursive reset,
starting from a qdev. However, it does not permit any of the devices
in the tree to use three-phase reset, because device reset goes
through the device_legacy_reset() function that only calls the single
DeviceClass::reset method.
Switch to using the device_cold_reset() function instead. This also
performs a recursive reset, where first the children are reset and
then finally the parent, but it uses the new (...in 2020...)
Resettable mechanism, which supports both the old style single-reset
method and also the new 3-phase reset handling.
This commit changes the five remaining uses of this function.
Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g' hw/i386/xen/xen_platform.c hw/input/adb.c hw/remote/vfio-user-obj.c hw/s390x/s390-virtio-ccw.c hw/usb/dev-uas.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
include/qapi/error.h on ERRP_GUARD():
* It must be used when the function dereferences @errp or passes
* @errp to error_prepend(), error_vprepend(), or error_append_hint().
* It is safe to use even when it's not needed, but please avoid
* cluttering the source with useless code.
Clean up some of this clutter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-3-armbru@redhat.com>
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
The previous iteration was commit a95942b50c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220923084254.4173111-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
