Installing the licensed programs after changing the primary language

Follow these steps to install the licensed programs after you have changed the primary language.

If you have secondary logical partitions, you must perform this procedure on each partition to which you want to install the licensed programs.

  1. Begin at the Sign On display. 
                                  Sign On
                                        System. . . . :  XXX
                                        Subsystem . . :  XXXXX
                                        Display . . . :  XXXXXXXX
 
        User. . . . . . . . . . . . . . QSECOFR
        Password. . . . . . . . . . . . 
        Program/procedure . . . . . . . ________
        Menu. . . . . . . . . . . . . . ________
        Current library . . . . . . . . ________
    Type QSECOFR for the User prompt, and type your password, if required. Press Enter.
  2. Several display messages appear. To continue, press Enter on each display. The following is an example of a message that might appear: 
                                      Display Messages
                                                        System:   XXXX
 
 Queue  . . . . . :   QSYSOPR                 Program . . . . :   *DSPMSG
   Library  . . . :     QSYS                    Library . . . :
 Severity . . . . :   10                      Delivery  . . . :   *BREAK
 
 Press enter to continue.
   System object QWCSCPF created again during IPL.
  3. The IPL Options display appears. 
                                      IPL Options
 
Type choices, press Enter.
 
System date . . . . . . . . . . . . . . .  XX / XX / XX     MM / DD / YY
System time . . . . . . . . . . . . . . .  XX : XX : XX     HH : MM : SS
System time zone  . . . . . . . . . . . .  Q0000UTC         F4 for list
Clear job queues. . . . . . . . . . . . .  N                Y=Yes, N=No
Clear output queues . . . . . . . . . . .  N                Y=Yes, N=No
Clear incomplete job logs . . . . . . . .  N                Y=Yes, N=No
Start print writers . . . . . . . . . . .  Y                Y=Yes, N=No
Start system to restricted state  . . . .  Y                Y=Yes, N=No
 
 
Set major system options. . . . . . . . .  Y                Y=Yes, N=No
Define or change system at IPL. . . . . .  N                Y=Yes, N=No
 
 
 
 
 
 
 
 
Last power-down operation was ABNORMAL
    Note: Ignore the message on the bottom of the IPL Options display.
    Type the following and press Enter.
    • System date (Use the current date.)
    • System time (Use the current time, 24-hour clock.)
    • System time zone (Verify that it is correct or press F4 to select a time zone.)
    • Start system to restricted state Y
    • Set major system options N
  4. Additional display messages could be shown.

    Press Enter after each message to continue.

  5. The i5/OS™ Main Menu (or the menu you chose as your initial menu) appears on your console.

    Type CHGMSGQ QSYSOPR *BREAK SEV(95) and press Enter.

  6. A message display could appear. Press Enter.
  7. The i5/OS Main Menu (or the menu you chose as your initial menu) appears again.

    Type GO LICPGM and press Enter.

  8. The Work with Licensed Programs display appears. 
     LICPGM                   Work with Licensed Programs                           
                                                             System:   XXXX     
 Select one of the following:                                                   
                                                                                
   Manual Install                                                               
      1. Install all                                                            
                                                                                
   Preparation                                                                  
      5. Prepare for install                                                    
                                                                                
   Licensed Programs                                                            
     10. Display installed licensed programs                                    
     11. Install licensed programs                                              
     12. Delete licensed programs                                               
     13. Save licensed programs

    If you are using primary language media, type 11, press Enter, and go to step 9.

    If you are using secondary language media, type 1, press Enter and go to step 12.

  9. The Install Licensed Programs display appears. Type 1 in the option column next to the IBM® products and options that have *COMPATIBLE or *INSTALLED as the installed status value and which exist on the media you will use for the installation. Press Enter.
  10. The Confirm Install of Licensed Programs display appears. Press Enter to confirm your choices or press F12 to return to the Install Licensed Programs display and change your choices.
  11. The Install Options display appears. 
                                    Install Options                                 
                                                             System:   XXXX     
 Type choices, press Enter.                                                     
                                                                                
   Installation device  . . .   OPT01        Name                               
                                                                                
   Objects to install . . . .   3            1=Programs and language objects    
                                             2=Programs                         
                                             3=Language objects                 
                                                                                
   Nonaccepted agreement. . .   2            1=Do not install licensed program  
                                             2=Display software agreement       
                                                                                
   Automatic IPL  . . . . . .   N            Y=Yes                                    
                                             N=No
    Type the following on this display:
    • Installation device: OPT01 (In this example, OPT01 is used for the installation device. If you use a different naming convention, type the name that you have assigned to the installation device.)
    • Objects to install: 3
    • Nonaccepted agreement: 2
  12. One or both of the following displays show the status of the licensed programs and language objects as they are being installed on the system. You do not need to respond to these status displays. 
                             Installing Licensed Programs                         
                                                                 System: XXXX 
                                                                              
   Licensed programs processed . . . . . . . . . . :      0 of XXX            
                                                                              
                     Licensed program install in progress

    The following display is an example of the display that appears during the installation process.

                         Installing Licensed Programs                        
  
                                                             System: XXXX
  Licensed programs processed  . . . . . . . . . . :      X              
                                                                         
  Licensed                                                               
  Program   Option   Description                                    Type 
  5722SS1            i5/OS - Library QUSRSYS                       2922
  13. If you see the following message, load the next volume of the language media and continue the installation Be certain that the label on the next volume is for the same language. 
                                     Display Messages
                                                       System:   XXXX
 Queue  . . . . . :    QSYSOPR               Program . . . . :   *DSPMSG
   Library  . . . :     QSYS                   Library . . . :
 Severity . . . . :       95                 Delivery  . . . :   *BREAK
 
 Type reply (if required), press Enter.
   Load the next volume in optical device OPT01 (X G)
     Reply . . . . G

    Type G and press Enter. After you load each volume, type G and press Enter. If there are no more volumes to load that contain licensed programs, or if you want to end the loading process, type X and press Enter.

  14. The Work with Licensed Programs display appears on your console when the language objects for all of the licensed programs are installed. One of the following messages appears on the bottom of the Work with Licensed Programs display:

    Work with licensed programs function has completed. Press F3 (Exit) to return to the i5/OS Main Menu.

    Work with licensed programs function not complete. Go to Troubleshooting software installation problems to determine the problem.

You have completed this task.

To complete your installation, go to Checklist: Completing the installation and follow the instructions there.

Parent topic: Changing the primary language of your server or logical partition
Previous topic: Changing the primary language