Work with the BOOTP table

The administrator uses the Work with BOOTP Table display to add, change, remove, or display an entry in the BOOTP table.

To work with BOOTP table, perform the following steps:

Specify the CFGTCPBP command from the command prompt.
Select option 2 (Work with BOOTP Table) on the Configure TCP/IP BOOTP display to view the Work with BOOTP Table display.
You can also type WRKBPTBL.

Figure 1. Work with BOOTP Table (WRKBPTBL)

                             Work with BOOTP Table
                                                       System:   SYSNAM01
 Type options, press Enter.
   1=Add   2=Change   4=Remove   5=Display
 
       Client
       Host                               MAC                 IP
 Opt   Name                               Address             Address
 
       act01.ibm.com                      02.01.8C.06.34.98   9.130.42.1