Use these instructions to connect the twinaxial cable.
- Look at card positions C03, C04, and C11 on the back of the server.
Locate the position that contains card 2746. This is your twinaxial adapter
card. If more than one position contains card 2746, then select the card in
position C04. If card 2746 is not in position C04, but it is in position C03
or C11, select the card in either location.
- Locate the 8-port twinaxial attachment cable (PN 21F5093). Attach
the cable to the connector on the 2746 twinaxial adapter card. You must supply
this twinaxial cable.
- Connect a twinaxial cable from the workstation that you will be
using as the system console to port 0 on the 8-port twinaxial attachment cable.
Note: The workstation address of your console must be set to 0. To set
the address, refer to the reference material that was shipped with your workstation.
- Continue with the next task.