Use these instructions to connect the twinaxial cable.
- Look at card positions C06 through C02 on the back of the server.
Locate the position that contains card 2746. This is your twinaxial adapter
card. If more than one position contains card 2746, then select the card in
position C06.
- Locate the 8-port twinaxial attachment cable (PN 21F5093). Attach
the cable to the connector on the 2746 twinaxial adapter card.
- Connect a twinaxial cable from the workstation that you will be
using as the system console to port 0 on the 8-port twinaxial attachment cable.
Note: The workstation address of your console must be set to 0. To set
the address, refer to the reference material that was shipped with your workstation.
- Continue with the next task.