This topic helps you to understand keyboard mapping for support of 3270 emulation.
The following table shows the default PF key assignments to perform the various 5250 functions. You can use the Display Keyboard Map (DSPKBDMAP) command to see the current keyboard mapping. Or, you can use option 6 (Display 3270 keyboard map) on the Configure TCP/IP Telnet Menu, while your terminal is in 3270 emulation mode.
| 5250 function key | Default 3270 keys to select function |
|---|---|
| Help | PF1 |
| 3270 Help | PF2 |
| Clear | PF3 |
| PF4 | |
| Display Embedded Attributes | PF5 |
| Test Request | PF6 |
| Roll Down | PF7 |
| Roll Up | PF8 |
| Error Reset | PF10 or Enter |
| Sys Req | PF11 |
| Record Backspace | PF12 |
| F1 through F12 | Press PA1, then one of the following: PF1 through PF12 |
| F13 through F24 | Press PA2, then one of the following: PF1 through PF12 or PF13 through PF24 (if present) |
| Field Exit | Erase EOF, then Field Tab |
| Attention | For 3277 use Test Request, then PA1. For 3278/3279 use ATTN key |
The following example CL program sets the keyboard map for a 327x-type workstation that is using Telnet to go to an iSeries™ server. This program maps the iSeries function keys to their equivalent function keys on the 327x workstation. If you attempt to run a CHGKBDMAP command from a workstation not in 3270 emulation mode, you will receive the CPF8701 message. By monitoring it, the rest of the program goes unused in these circumstances.
PGM
MONMSG MSGID(CPF8701 CPF0000)
CHGKBDMAP PF1(*F1) PF2(*F2) PF3(*F3) PF4(*F4) PF5(*F5)
PF6(*F6) PF7(*DOWN) PF8(*UP) PF9(*F9)
PF10(*F10) PF11(*F11) PF12(*F12)
PA1PF1(*HELP) PA1PF2(*HLP3270)
PA1PF3(*CLEAR) PA1PF4(*PRINT)
PA1PF5(*DSPATR) PA1PF6(*TEST) PA1PF7(*F7)
PA1PF8(*F8) PA1PF9(*ATTN) PA1PF10(*RESET)
PA1PF11(*SYSREQ) PA1PF12(*BCKSPC)
ENDPGM
By storing this CL source as part of the QCLSRC file in library TCPLIB as member CHGKBD, you can create the CL program CHGKBD into the TCPLIB library by using the following CL command:
CRTCLPGM PGM(TCPLIB/CHGKBD) SRCFILE(TCPLIB/QCLSRC)
TEXT('Change the keyboard mapping for 327x terminals')
The CHGKBD program can then be called by anyone using Telnet to an iSeries server. It can also be called automatically at sign-on time by specifying the CHGKBD program for the Initial program parameter on the CHGUSRPRF command, or the CHGKBD program can be called by the profile's initial program.
The PA1 and PA2 keys do not appear on a PC keyboard. A keyboard map in your 3270 emulator provides the function of these 3270 keys on a PC keyboard.
The default 3270 Telnet keyboard map uses these keys. Therefore, it is important that you know where these keys are on the keyboard before starting a 3270 Telnet session. This is especially important if you are planning to start a session without changing the keyboard mapping. You should refer to your emulator documentation for the keys or keystrokes required to provide these functions.
There are some 5250 key sequences for which there is no supported 3270 key sequence and, therefore, it is not possible to set these keyboard commands on a 3270. These key sequences are:
The 5250 Field Exit Key function is performed on a 3270 keyboard using the Erase EOF key and then the tab key.
When using Telnet 3270 full-screen mode from the 3270 terminal and before the default mapping for the terminal is changed, the keys PF1 to PF12 might be emulated by the key sequence PA1 PFx. Therefore, instructions like Press PF3 or Press PF4 should read: Press PA1 PF3 and Press PA1 PF4, before creating a new keyboard map.
Depending on the installation of the Telnet client for the host for example VM Telnet client, when pressing PA1, the user might get the instruction TELNET command: at the bottom line of the display. If the system displays this instruction type: PA1, press the Enter key; move the cursor to the command line; and press the desired PF key. In this case, the following commands can emulate PF1 to PF12:
For additional keyboard mapping information, see Appendix D. TELNET 3270 Keyboard Mappings.