INTNUMInterval number: The nth sample database interval based on the start time specified in the Create Performance Data (CRTPFRDTA) command.PD (5,0)DTETIMInterval date (yymmdd) and time (hhmmss): The date and time of the sample interval.C (12)INTSECElapsed interval seconds: The number of seconds since the last sample interval.PD (7,0)IOPRNIOP resource nameC (10)CIIOPReservedC (1)CITYPEThe type of IOP described by this record.C (4)CTIPKTTotal packets transferred.PD (11,0)CIKBYOTotal KB transmitted from an IOP to the system across the bus.PD (11,0)CIKBYITotal KB transmitted to the IOP from the system across the bus.PD (11,0)CIOPSROPSTART bus unit message received from another bus unit using normal flow.PD (11,0)CIOPSSOPSTART bus unit message received from another bus unit using reverse flow method 2 (always 0).PD (11,0)CISGLRSignals received.PD (11,0)CIOPSTOPSTARTs sent.PD (11,0)CISLGSSignals sent.PD (11,0)CIRSTQRestart queues sent.PD (11,0)CIRQDODMA requests sent for output of data: The number of requests the IOP sends to the system for data to be sent from the IOP to the system across the bus.PD (11,0)CIRQDIDMA requests sent for input of data: The number of requests the IOP sends to the system for data to be sent to the IOP from the system across the bus.PD (11,0)CIBNAROccurrences of BNA received.PD (11,0)CIPRCUProcessor utilization: The number of fixed-time intervals that this communications IOP spent in the idle state.PD (11,0)CIIDLCIdle loop count (see notes): The number of times the communications IOP ran an idle loop. This is done when the IOP has no work to perform. This count is used with the idle loop time to calculate the primary IOP processor utilization in seconds.PD (11,0)CIIDLTIdle loop time (see notes): The time (in hundredths of microseconds) for the primary IOP processor to run the idle loop once.PD (11,0)CIRAMUAvailable local storage (in bytes): The number of bytes of free local storage in the IOP. The free local storage will probably be non-contiguous because of fragmentation.PD (11,0)CISYSFThe total time (in milliseconds) used by the IOP for basic system function that is running in the primary IOP processor.PD (11,0)CICOMMCombined processing time (in milliseconds) accounted for by all of the communication protocol tasks that are running in the primary IOP processor.PD (11,0)CISDLCProcessing time (in milliseconds) used by SDLC communications tasks that are running in the primary IOP processor.PD (11,0)CIASYNProcessing time (in milliseconds) used by asynchronous communications tasks that are running in the primary IOP processor.PD (11,0)CIBSCProcessing time (in milliseconds) used for bisynchronous protocol tasks that are running in the primary IOP processor.PD (11,0)CIX25LProcessing time (in milliseconds) used by X.25 LLC tasks that are running in the primary IOP processor.PD (11,0)CIX25PProcessing time (in milliseconds) used by X.25 PLC tasks that are running in the primary IOP processor.PD (11,0)CIX25DTime (in milliseconds) accounted for by X.25 DLC tasks that are running in the primary IOP processor.PD (11,0)CILANLAN communications time: Total processing unit time (in milliseconds) used by token-ring network, Ethernet, frame relay, and fiber distributed data interface (FDDI) communications tasks that are running in the primary IOP processor.PD (11,0)CILAPProcessing time (in milliseconds) used by ISDN LAPD, LAPE, and PMI tasks that are running in the primary IOP processor.PD (11,0)CIQ931Processing time (in milliseconds) used by ISDN Q.931 tasks that are running in the primary IOP processor.PD (11,0)CIF1IDSubfunction 1 ID: The identifier for addition functions that may be running in the primary IOP processor.C (2)CIF1TMSubfunction 1 time: The total processing unit time (in milliseconds) used by the IOP function that is running in the primary IOP processor.PD (11,0)CICPU2Processor time in milliseconds for the second IO processor, which handles specialized functions. This field applies to Integrated xSeries^® Servers (excluding I/O adapter versions) and wireless IOPs. This field is zero for other IOPs. Collection Services will not report values for Integrated xSeries Servers.PD (11,0)

Field Name	Description	Attribute