Reusable info modules - conref
Add All Disk Units to the System System: XXXX Non-configured device parity capable disk units are attached to the system. Disk units can not be added automatically. It is more efficient to device parity protect these units before adding them to the system. These disk units may be parity enabled and added at SST (i5/OS). Configured disk units must have parity enabled at DST. Select one of the following: 1. Perform any disk configuration at SST (i5/OS) 2. Perform disk configuration using DST
Install Licensed Internal Code System: XXXX Select one of the following: 1. Install Licensed Internal Code 2. Work with Dedicated Service Tools (DST) 3. Define alternate installation device
Install Licensed Internal Code (LIC) Disk selected to write the Licensed Internal Code to: Serial Number Type Model I/O Bus Controller Device xx-xxxxxxx xxxx xxx x x x Select one of the following: 1. Restore Licensed Internal Code 2. Install Licensed Internal Code and Initialize system 3. Install Licensed Internal Code and Recover Configuration 4. Install Licensed Internal Code and Restore Disk Unit Data 5. Install Licensed Internal Code and Upgrade Load Source
Install Licensed Internal Code - Status Install of the Licensed Internal Code in progress. +-------------------------------------------------------+ Percent | XX % | complete +-------------------------------------------------------+ Elapsed time in minutes . . . . . . . . : x.x Please wait.
- Type CHGMSGQ QSYSOPR *BREAK SEV(60) and press Enter.
- A message display could appear. Press Enter.
- Type ENDSBS *ALL *IMMED and press Enter.
- When the following message appears, press Enter to continue:
ENDSBS SBS(*ALL) command being processed
- The message System ended to restricted condition appears. Press Enter to continue.
- Type CHGMSGQ QSYSOPR SEV(95) and press Enter.
- A message display could appear. Press Enter.
Type GO LICPGM and press Enter.
IPL or Install the System System: XXXX Select one of the following: 1. Perform an IPL 2. Install the operating system 3. Use Dedicated Service Tools (DST) 4. Perform automatic installation of the operating system 5. Save Licensed Internal Code
Install Device Type Selection System: XXXX Select the installation device type: 1. Tape 2. Optical 3. Virtual optical - preselected image catalog 4. Current alternate selected device None
If you do not want device parity protection or mirrored
protection or user ASPs, select option 3 (Add all disk units to the system
auxiliary storage pool). By adding disk units before you install the operating
system, you improve your overall system performance because the operating
system is distributed across all of your disk units.
Note: If you have RAID-capable
disk units on your system or if your system ASP has mirrored protection, your
display will not have option 3.
| For logical partitions only |
|---|
If you will be creating secondary logical
partitions later, you do not want to configure all units now. Refer to the
validated output from the Logical Partition Validation Tool (LVT) supplied
by IBM for the configuration selection. To access the tool, go to the Logical Partitioning
Web site  . |
Add All Disk Units to the System System: XXXX Select one of the following: 1. Keep the current disk configuration 2. Perform disk configuration using DST 3. Add all disk units to the system auxiliary storage pool 4. Add all disk units to the system ASP and balance data
Note: If either the Disk Configuration Error Report
display or the Disk Configuration Warning Report display appears, go to Disk configuration warning and error messages to determine the appropriate action.
- You could see the following display if your disk
configuration has changed. Type 5 next to the problem and press Enter
to display the detailed report.
Problem Report Note: Some action for the problems listed below may need to be taken. Please select a problem to display more detailed information about the problem and to see what possible action may be taken to correct the problem. Type option, press Enter. 5=Display Detailed Report OPT Problem _ __________________________________________________________ _ __________________________________________________________
- If the following display appears, a disk unit that
you selected to add to your disk configuration could already have data on
it. If you choose to continue, any data that is on the disk units listed
will be removed.
Be certain that you want to configure the disk before you continue. Follow the instructions on the display.
Press Enter to return to the Problem Report display. Press F10 to continue the Add Disk Unit subtask.
Possibly Configured Units Problem: These non-configured units appear to be configured units of some other disk configuration and may contain valid data. This option will clear the data from these units and destroy the other disk configuration. Press Enter to continue Press F12=Cancel to return and change your choices. Serial Resource Other System Number Type Model Name Serial Number __________ ____ ___ __________ __________ __________ ____ ___ __________ __________ __________ ____ ___ __________ __________ __________ ____ ___ __________ __________ __________ ____ ___ __________ __________ __________ ____ ___ __________ __________ __________ ____ ___ __________ __________ More.. F3=Exit F12=Cancel - The following display shows the percentage of disk
units added. This display does not require a response.
Function Status You selected to add units. ___ % Complete
Install the Operating System Type options, press Enter. Install option . . . . . . 1 1=Take defaults (No other options are displayed) 2=Change install options Date: Year . . . . . . XX 00-99 Month . . . . . XX 01-12 Day . . . . . . XX 01-31 Time: Hour . . . . . . XX 00-23 Minute . . . . . XX 00-59 Second . . . . . XX 00-59
Message ID. . . : CPI2070 i5/OS Installation Status +---------------------------------------------------+ Stage 2 | XX % | +---------------------------------------------------+ Installation Objects Stage Completed Restored 1 Creating needed profiles and libraries . . . . : X >> 2 Restoring programs to library QSYS . . . . . . : XXXXX 3 Restoring language objects to library QSYS . . : 4 Updating program table . . . . . . . . . . . . : 5 Installing database files. . . . . . . . . . . : 6 Completing i5/OS™ installation . . . . . . . . : i5/OS is a trademark of IBM in the United States and other countries.
LICPGM Work with Licensed Programs
System: XXXX
Select one of the following:
Manual Install
1. Install all
Preparation
5. Prepare for install
Licensed Programs
10. Display installed licensed programs
11. Install licensed programs
12. Delete licensed programs
13. Save licensed programs
Type 11 (option
11. Install licensed programs), and press Enter. Please read the
note below for an alternative to using option 11.- The Install Options display appears. The following
is an example of this display.
Install Options System: XXXX Type choices, press Enter. Installation device . . . OPT01 Name Objects to install . . . . 1 1=Programs and language objects 2=Programs 3=Language objects Nonaccepted agreement. . . 2 1=Do not install licensed program 2=Display software agreement Automatic IPL . . . . . . N Y=Yes N=NoType the following on this display:- Installation device: OPT01 (In this example, OPT01 is used for the installation device. If you use a different naming convention, type the name that you have assigned to the installation device.)
- Objects to install: 1
- Nonaccepted agreement: 2
- Automatic IPL: N
Press Enter.
Installing Licensed Programs
System: XXXX
Licensed programs processed . . . . . . . . . . : 0 of XXX
Licensed program install in progress
The following display is an example of the display that appears
during the installation process.Note: This display shows which licensed programs and
optional parts of licensed programs are being installed. After the *PGM objects
and *LNG objects for each licensed program or optional part have been installed,
the licensed program identifier disappears from the display and the number
in the licensed programs processed field changes to show how many are processed.
Licensed Internal Code IPL in Progress
IPL:
Type . . . . . . . . . : Attended
Start date and time . . : xx/xx/xx xx:xx:xx
Previous system end . . : Normal
Current step/total. . . : 1 16
Reference code detail . : C6004050
IPL step . . . . . . : Storage Management Recovery
The following list shows some of the IPL steps that are shown on
the IPL Step in Progress display. - Authority Recovery
- Journal Recovery
- Database Recovery
- Journal Synchronization
- Start the Operating System
Some of the IPL steps could take a long time.
Sign On
System. . . . : XXX
Subsystem . . : XXXXX
Display . . . : XXXXXXXX
User. . . . . . . . . . . . . . QSECOFR
Password. . . . . . . . . . . .
Program/procedure . . . . . . . ________
Menu. . . . . . . . . . . . . . ________
Current library . . . . . . . . ________
Type QSECOFR for the User prompt, and type
your password, if required. Press Enter. Sign On
System. . . . . . : XXXX
Subsystem . . . . : XXXX
Display . . . . . : XXXXXXXX
User. . . . . . . . . . . . . . . . QSECOFR
Password . . . . . . . . . . . . .
Program/procedure . . . . . . . . . ________
Menu . . . . . . . . . . . . . . . ________
Current library . . . . . . . . . . ________
Type the following and press Enter: - User: QSECOFR
- Password: (Enter password, if required.)
Display Messages System: XXXX Queue . . . . . : QSYSOPR Program . . . . : *DSPMSG Library . . . : QSYS Library . . . : Severity . . . . : 95 Delivery . . . : *BREAK Type reply (if required), press Enter. Load the next volume in optical device OPT01 (X G) Reply . . . . G
Type G and press Enter. After you load each volume, type G and press Enter. If there are no more volumes to load that contain licensed programs, or if you want to end the loading process, type X and press Enter.
You have completed this task.
- Do you need to install additional licensed programs?
- No. Go to the next step.
- Yes. Go to Installing additional licensed programs and complete the instructions.
- Do you need to install a secondary language?
- No. Go to the next step.
- Yes. Go to Installing a secondary language and complete the instructions.
- You must complete the installation process before you put your system into operation. Go to Checklist: Completing the upgrade or replacement and complete the instructions.
Select a Language Group System: XXXX Note: The language feature shown is the language feature installed on the system. Type choice, press Enter. Language feature . . . . . . . . . . . . . . . 2924
If you perform these actions on a system with logical
partitions, the instructions pertain only to that partition. If that partition
is a primary partition, these instructions will change the power status and
perform an IPL on the entire system. There is no effect if you are on a system
managed by Hardware Management Console.
Attention: If
you are installing on a primary partition, you must shut down all partitions
before performing these instructions. Otherwise, you could lose data
or damage system software objects. You must perform these instructions for
each partition with which you will do the related work. Also, references to
the control panel refer either to the virtual control panel (Work with Partition
Status display) on your primary partition.
If you have secondary logical partitions, you must perform this procedure on each partition to which you want to install the licensed programs.