Print System Report (PRTSYSRPT)

Parameters

Keyword	Description	Choices	Notes
MBR	Member	Name	Required, Positional 1
TITLE	Report title	Character value, *MBR	Optional, Positional 3
PERIOD	Time period for report	Element list	Optional
	Element 1:	Element list
	Element 1: Starting time	Time, FIRST, SELECT
	Element 2: Starting date	Date, *FIRST
	Element 2:	Element list
	Element 1: Ending time	Time, *LAST
	Element 2: Ending date	Date, *LAST
LIB	Library	Name, QPFRDATA	Optional, Positional 2
TYPE	Type of information	Single values: ALL Other values (up to 8 repetitions): WORKLOAD, RSC, RSCEXPN, POOL, DISK, CMN, TCPIP, *HTTP	Optional
SLTJOB	Select jobs	Single values: ALL Other values (up to 50 repetitions): Qualified job name*	Optional
	Qualifier 1: Select jobs	Generic name, name
	Qualifier 2: User	Name
	Qualifier 3: Number	000000-999999
OMTJOB	Omit jobs	Single values: NONE Other values (up to 50 repetitions): Qualified job name*	Optional
	Qualifier 1: Omit jobs	Generic name, name
	Qualifier 2: User	Name
	Qualifier 3: Number	000000-999999
SLTUSRID	Select users	Single values: ALL Other values (up to 50 repetitions): Generic name, name*	Optional
OMTUSRID	Omit users	Single values: NONE Other values (up to 50 repetitions): Generic name, name*	Optional
SLTPOOLS	Select pools	Single values: *ALL Other values (up to 64 repetitions): 1-64	Optional
OMTPOOLS	Omit pools	Single values: *NONE Other values (up to 64 repetitions): 1-64	Optional
SLTSBS	Select subsystems	Single values: ALL Other values (up to 50 repetitions): Name*	Optional
OMTSBS	Omit subsystems	Single values: NONE Other values (up to 50 repetitions): Name*	Optional
SLTLINE	Select communications lines	Single values: ALL Other values (up to 50 repetitions): Name*	Optional
OMTLINE	Omit communications lines	Single values: NONE Other values (up to 50 repetitions): Name*	Optional
SLTCTL	Select control units	Single values: ALL Other values (up to 50 repetitions): Name*	Optional
OMTCTL	Omit control units	Single values: NONE Other values (up to 50 repetitions): Name*	Optional
SLTFCNARA	Select functional areas	Single values: ALL Other values (up to 50 repetitions): Character value*	Optional
OMTFCNARA	Omit functional areas	Single values: NONE Other values (up to 50 repetitions): Character value*	Optional
JOB	Job name	Name, PRTSYSRPT, *MBR	Optional
JOBD	Job description	Single values: NONE Other values: Qualified object name*	Optional
	Qualifier 1: Job description	Name, QPFRJOBD
	Qualifier 2: Library	Name, LIBL, CURLIB

Top

Time period for report (PERIOD)

Specifies the period of time on which to report. The parameter consists of four elements: a starting time and date, and an ending time and date. Data collected prior to the starting time on the starting date and after the ending time on the ending date is not included in the report.

The symbol *N can be used to designate the default value for any of the four elements.

The possible starting time values are:

*FIRST

Data records starting from the beginning of the first day (00:00:00) of the collection period are included.

*SELECT

An interval selection screen is displayed from which you can select one or more intervals for inclusion. This value is valid only in the interactive environment. If this value is used, the remaining values of this parameter (starting time and date and ending time and date) are ignored.

start-time

Specify the time of the first data record to include in the report, using the format, hhmm or hhmmss, where hh is the hours, mm is the minutes, and ss is the seconds.

The time is specified in 24-hour format with or without a time separator:

Without a time separator, specify a string of 4 or 6 digits (hhmm or hhmmss) where hh = hours, mm = minutes, and ss = seconds.
With a time separator, specify a string of 5 or 8 digits where the time separator specified for your job is used to separate the hours, minutes, and seconds. If you enter this command from the command line, the string must be enclosed in apostrophes. If a time separator other than the separator specified for your job is used, this command will fail.

All time and date entries must be 2-digits in length, meaning zeros must be included.

The possible starting date values are:

*FIRST: Data records starting from the first day of the collection period are included in the report.
start-date: Specify the date of the first data record to include in the report. The date must be entered in the format specified by the system value QDATFMT, and if separators are used, as specified by the system value QDATSEP.

The possible ending time values are:

*LAST: Data records through the end of the day (23:59:59) are included in the report.
end-time: Specify the time of the last data record to include in the report. Use the same format used for the starting time.

The possible ending date values are:

*LAST: Data records through the last day of the collection period are included in the report.
end-date: Specify the date of the last record to include in the report. The date must be entered in the format specified by the system value QDATFMT, and if separators are used, as specified by the system value QDATSEP.

Type of information (TYPE)

Specifies the sections of the report that you want to print.

The possible single value is:

*ALL: All sections of the report are printed.

*WORKLOAD: Specify that you want to print the Workload section.
*RSC: Specify that you want to print the Resource Utilization section.
*RSCEXPN: Specify that you want to print the Resource Utilization Expansion section.
*POOL: Specify that you want to print the Storage Pool Utilization section.
*DISK: Specify that you want to print the Disk Utilization section.
*CMN: Specify that you want to print the Communication Summary section. This section shows data about IOP, protocol, line utilization, active devices, transactions, response times and bytes received/transmitted.
*TCPIP: Specify that you want to print the TCP/IP Summary section. This section includes additional data for TCP/IP protocols, such as packets received/transmitted, MTU sizes, etc.
*HTTP: Specify that you want to print the HTTP Server Summary section. This section includes statistics for HTTP Server (powered by Apache).

Select jobs (SLTJOB)

Specifies a list of up to 50 jobs to be included in the report. Only specified jobs are included in the report.

Individual jobs are identified by a "job identifier." A job identifier is either the special value *ALL or a qualified name that consists of up to three elements: a job number, a user name, and a job name. Job identifiers are written in the form, job-number/user-name/job-name, but all three elements do not have to be specified. The symbol *N can be used as a placeholder for up to two of the elements of the job identifier.

Note: This parameter and the Omit jobs prompt (OMTJOB parameter) are mutually exclusive.

You can enter multiple values for this parameter.

Element 1: Job name

*ALL: All jobs in the collected data are included, unless excluded by another selection value.
job-name: Specify the names of the jobs to select. Because jobs may have identical job names, this value may not identify a specific job. A generic name can be specified for this value.

Note: A generic name is a character string that contains one or more characters followed by an asterisk(*), for example, ABC*. The asterisk substitutes for any valid characters. A generic name specifies all objects with names that begin with the generic prefix for which the user has authority. If an asterisk is not included with the generic name, the system assumes it to be the complete object name.

job-number: Specify the 6-digit number of a job to select. All six digits must be specified, including zeros.
user-name: Specify the user names of the jobs to select. Because jobs may have identical user names, this value may not identify a specific job.

Element 2: Thread

*ALL: All threads are included, unless excluded by some other selection criterion.
thread-identifier: Specify the thread identifier to select. Because some jobs can have identical thread identifiers, this value may not identify a specific job.

Omit jobs (OMTJOB)

Specifies a list of up to 50 jobs to be omitted from the report.

Individual jobs are identified by a "job identifier." A job identifier is either the special value *NONE or a qualified name that consists of up to three elements: a job number, a user name, and a job name. Job identifiers are written in the form, job-number/user-name/job-name, but all three elements do not have to be specified. The symbol *N can be used as a placeholder for up to two of the elements of the job identifier.

Note: This parameter and the Select jobs prompt (SLTJOB parameter) are mutually exclusive.

You can enter multiple values for this parameter.

Element 1: Job name

*NONE: Jobs are not excluded based on job identifier.
job-name: Specify the names of the jobs to omit. Because jobs may have identical job names, this value may not identify a specific job. A generic name can be specified for this value.

job-number: Specify the 6-digit number of a job to omit. All six digits must be specified, including zeros.
user-name: Specify the user names of the jobs to omit. Because jobs may have identical user names, this value may not identify a specific job.

Element 2: Thread

*ALL: All threads are included, unless excluded by some other selection criterion.
thread-identifier: Specify the thread identifier to select. Because some jobs can have identical thread identifiers, this value may not identify a specific job.

Select users (SLTUSRID)

Specifies a list of up to 50 user names to be included in the report. Only jobs with one of the specified user names are included in the report.

Note: This parameter and the Omit users prompt (OMTUSRID parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*ALL: All jobs with user names are included, unless excluded by another selection value.
user-name: Specify the user names of the jobs to select. Because jobs may have identical user names, this value may not identify a specific job. A generic name may be specified for this value. SLTUSRID(user) is equivalent to SLTJOB(*N/user/*N).

Omit users (OMTUSRID)

Specifies a list of up to 50 user names to be omitted from the report.

Note: This parameter and the Select users prompt (SLTUSRID parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*NONE: No jobs are excluded based on the user name.
user-name: Specify the user names of the jobs to omit. Because jobs may have identical user names, this value may not identify a specific job. A generic name may be specified for this value. OMTUSRID(user) is equivalent to OMTJOB(*N/user/*N).

Select communications lines (SLTLINE)

Specifies a list of up to 50 communications lines to select. Only jobs that use a remote device connected through one of the specified communications lines are included in the report.

Note: This parameter and the Omit communications lines prompt (OMTLINE parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*ALL: All jobs are included in the report, unless excluded by another selection value.
communication-line-name: Specify the name of a communications line to select. This excludes jobs using remote devices connected through other communications lines, even if the controllers to which those devices are attached are specified on the Select control units prompt (SLTCTL parameter).

Omit communications lines (OMTLINE)

Specifies a list of up to 50 communications lines to omit. Jobs that use a remote device connected through any of the specified communications lines are excluded from the report.

Note: This parameter and the Select communications lines prompt (SLTLINE parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*NONE: Jobs are not excluded from the report based on communications line.
communication-line-name: Specify the name of a communications line to omit.

Select control units (SLTCTL)

Specifies a list of up to 50 communications controllers to select. Only jobs that use a device connected to one of the specified controllers are included in the report.

Note: This parameter and the Omit control units prompt (OMTCTL parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*ALL: All jobs are included, unless excluded by another selection value.
controller-name: Specify the name of a communications controller to select.

Omit control units (OMTCTL)

Specifies a list of up to 50 communications controllers to omit. Jobs that use a device connected to any of the specified controllers are excluded from in the report.

Note: This parameter and the Select control units prompt (SLTCTL parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*NONE: Jobs are not excluded based on communications controllers.
controller-name: Specify the name of a communications controller to omit.

Select functional areas (SLTFCNARA)

Specifies a list of up to 50 functional areas to select. Only jobs and users identified in one of the functional areas are included in the report.

A functional area is a list of job names and/or user names previously defined by the user. More information on functional areas is in the Performance Tools for iSeries book.

Note: This parameter and the Omit functional areas prompt (OMTFCNARA parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*ALL: All jobs are included in the report, unless excluded by another selection value.
functional-area-name: Specify the name of a functional area to select.

Omit functional areas (OMTFCNARA)

Specifies a list of up to 50 functional areas to omit. Jobs and users identified in any of the functional areas are excluded from the report.

A functional area is a list of job names and/or user names previously defined by the user. More information on functional areas is in the Performance Tools for iSeries book.

Note: This parameter and the Select functional areas prompt (SLTFCNARA parameter) are mutually exclusive.

You can enter multiple values for this parameter.

*NONE: Jobs are not excluded from the report based on functional area.
functional-area-name: Specify the name of a functional area to omit.

Job name (JOB)

Specifies the job name to be used if submitting the job for batch processing.

Any value for this parameter is ignored if *NONE is specified for the Job description prompt (JOBD parameter).

Note: If *NONE is specified for the Job description prompt (JOBD parameter), job processing is performed interactively.

The possible job name values are:

PRTSYSRPT: The command name is used for the job name.
*MBR: The name selected for the performance data member in the Member prompt (MBR parameter) is used.
job-name: Specify the name to be used for any and all batch jobs.

Job description (JOBD)

Specifies the job description used to submit the job for batch processing.

The possible job description values are:

QPFRJOBD: The IBM-supplied job description, QPFRJOBD, is used.
job-description-name: Specify the name of an alternate job description.
*NONE: A batch job is not submitted; processing continues interactively while the user waits. The user's workstation is not available for other use during this time, which could be significant for long jobs.

The possible library values are:

*LIBL: All libraries in the job's library list are searched until the first match is found.
*CURLIB: The current library for the job is used to locate the job description. If no current library entry exists in the library list, QGPL is used.
library-name: Specify the library in which the job description is located.

Examples

Example 1: Printing a Report

PRTSYSRPT   MBR(APRIL18)

PRTSYSRPT   MBR(APRIL18)  SECTION(*ALL)

These commands print a complete system report for the performance data member APRIL18 in library QPFRDATA. The report title is the same as the text in the member.

Example 2: Selecting Intervals to Include in Report

PRTSYSRPT   MBR(NOV1)  PERIOD(*SELECT)
            TITLE('Intervals with Highest Response Times')

This command prints a system report for the data member NOV1 in library QPFRDATA. The user is presented with the interval-selection screen, which allows sorting of the intervals according to various criteria and the selection of certain intervals to be included in the report. The title of the report is Intervals with Highest Response Times.

Example 3: Selecting Sections to Include in Report

PRTSYSRPT   MBR(NOV1)  SECTION(*DSKUTL)

This command prints only the Disk Utilization section of the system report for the data member NOV1.