The Create Bound C++ Program (CRTBNDCPP) command starts the ILE C++ compiler. You can use this command in either batch or interactive mode, or from a CL program. The compiler attempts to create a program object based on the ILE C++ statements in the source code.

Note: When the CRTBNDCPP command is invoked, a temporary module object is created in the QTEMP library. The name of the temporary module object is the same as the name you specified on the PGM parameter of the CRTBNDCPP command. If a module object with that name already exists in QTEMP, an error message is generated and compilation stops. The temporary module object, which is used with the CRTBNDCPP command, is deleted after compilation stops whether or not compilation is successful.

Error messages for CRTBNDCPP

*ESCAPE Messages

CZS1613

The compilation failed.

Parameters

Keyword	Description	Choices	Notes
PGM	Program	Qualified object name	Required, Positional 1
	Qualifier 1: Program	Name
	Qualifier 2: Library	Name, *CURLIB
SRCFILE	Source file	Qualified object name	Optional, Positional 2
	Qualifier 1: Source file	Name, QCPPSRC
	Qualifier 2: Library	Name, *LIBL, *CURLIB
SRCMBR	Source member	Name, *PGM	Optional, Positional 3
SRCSTMF	Source stream file	Path name	Optional
TEXT	Text 'description'	Character value, *SRCMBRTXT, *BLANK	Optional
OUTPUT	Output options	Single values: *NONE, '*none' Other values: Element list	Optional
	Element 1: Output file name	Path name, *PRINT, '*print'
	Element 2: Title	Character value, *BLANK
	Element 3: Subtitle	Character value, *BLANK
OPTION	Compiler options	Values (up to 35 repetitions): *NOBITSIGN, *BITSIGN, *NOEVENTF, *EVENTF, *NOEXPMAC, *EXPMAC, *NOLOGMSG, *LOGMSG, *NOLONGLONG, *LONGLONG, *NORTTI, *RTTIALL, *RTTITYPE, *RTTICAST, *NOSHOWINC, *SHOWINC, *NOSHOWSRC, *SHOWSRC, *NOSHOWSYS, *SHOWSYS, *NOSHOWUSR, *SHOWUSR, *NOSYSINCPATH, *SYSINCPATH, *NOSTDINC, *STDINC, *NOINCDIRFIRST, *INCDIRFIRST, *NOXREF, *XREF, *NOXREFREF, *XREFREF, *NOFULL, *FULL, *NOSTDLOGMSG, *STDLOGMSG	Optional
CHECKOUT	Checkout options	Values (up to 45 repetitions): *NONE, *USAGE, *ALL, *NOCLASS, *CLASS, *NOCOND, *COND, *NOEFFECT, *EFFECT, *NOGENERAL, *GENERAL, *NOLANG, *LANG, *NOPARM, *PARM, *NOPORT, *PORT, *NOREACH, *REACH, *NOTEMP, *TEMP, *NOTRUNC, *TRUNC, *NOUNUSED, *UNUSED	Optional
OPTIMIZE	Optimization	10, 20, 30, 40	Optional
INLINE	Inline options	Element list	Optional
	Element 1: Inliner	*OFF, *ON
	Element 2: Mode	*NOAUTO, *AUTO
	Element 3: Threshold	1-65535, 250, *NOLIMIT
	Element 4: Limit	1-65535, 2000, *NOLIMIT
	Element 5: Report	*NO, *YES
DBGVIEW	Debugging view	*NONE, *ALL, *STMT, *SOURCE, *LIST	Optional
DEFINE	Define names	Single values: *NONE Other values (up to 32 repetitions): Character value	Optional
LANGLVL	Language level	*EXTENDED, *ANSI, *LEGACY	Optional
ALIAS	Alias	Values (up to 3 repetitions): *ANSI, *NOANSI, *ADDRTAKEN, *NOADDRTAKEN, *ALLPTRS, *NOALLPTRS, *TYPEPTR, *NOTYPEPTR	Optional
SYSIFCOPT	System interface options	*IFS64IO, *IFSIO, *NOIFSIO	Optional
LOCALETYPE	Locale object type	*LOCALE, *LOCALEUCS2, *LOCALEUTF	Optional
FLAG	Message flagging level	0, 10, 20, 30	Optional
MSGLMT	Compiler messages	Element list	Optional
	Element 1: Message limit	0-32767, *NOMAX
	Element 2: Message limit severity	0, 10, 20, 30
REPLACE	Replace program object	*YES, *NO	Optional
USRPRF	User profile	*USER, *OWNER	Optional
AUT	Authority	Name, *LIBCRTAUT, *ALL, *CHANGE, *USE, *EXCLUDE	Optional
TGTRLS	Target release	Simple name, *CURRENT, *PRV	Optional
ENBPFRCOL	Enable performance collection	Element list	Optional
	Element 1: Collection level	*PEP, *ENTRYEXIT, *FULL
	Element 2: Procedures	*NONLEAF, *ALLPRC
PFROPT	Performance options	Values (up to 2 repetitions): *SETFPCA, *NOSETFPCA, *NOSTRDONLY, *STRDONLY	Optional
PRFDTA	Profiling data	*NOCOL, *COL	Optional
TERASPACE	Teraspace options	Single values: *NO Other values: Element list	Optional
	Element 1: Teraspace enabled	*YES
	Element 2: Use teraspace interfaces	*NOTSIFC, *TSIFC
STGMDL	Storage model	*SNGLVL, *TERASPACE	Optional
DTAMDL	Data model	*P128, *LLP64	Optional
RTBND	Run time Binding	*DEFAULT, *LLP64	Optional
PACKSTRUCT	Pack structure	*NATURAL, 1, 2, 4, 8, 16	Optional
ENUM	Enum size	*SMALL, 1, 2, 4, *INT	Optional
MAKEDEP	Dependency information	Path name, *NONE	Optional
INCDIR	Include directory	Single values: *NONE Other values (up to 32 repetitions): Path name	Optional
CSOPT	Compiler services option	Character value, *NONE	Optional
LICOPT	Licensed internal code options	Character value, *NONE	Optional
DFTCHAR	Default char type	*UNSIGNED, *SIGNED	Optional
TGTCCSID	Target CCSID	1-65535, *SOURCE, *JOB, *HEX	Optional
TEMPLATE	Template options	Element list	Optional
	Element 1: Temporary include directory	Path name, *NONE, *TEMPINC
	Element 2: Maximum generated headers	1-99999, 1
	Element 3: Template validity checking	*NO, *WARN, *ERROR

Top

Program (PGM)

Specifies the name and library for the created program object.

program-name

Enter a name for the program object.

The possible library values are:

*CURLIB

The program object is stored in the current library. If a job does not have a current library, the program object is created in the QGPL library.

library-name

Specify the name of the library where the program object being created will be stored.

Source file (SRCFILE)

Specifies the source file name and library of the file containing the ILE C++ source code that you want to compile.

QCPPSRC

The source file named QCPPSRC contains the member with the ILE C++ source code that you want to compile.

source-file-name

Enter the name of the source file that contains the member with the ILE C++ source code.

The possible library values are:

*LIBL

The library list is searched to find the library where the source file is located.

*CURLIB

The current library is searched for the source file. If a job does not have a current library, QGPL is searched for the source file.

library-name

Enter the name of the library that contains the source file.

Source member (SRCMBR)

Specifies the name of the member containing the source code to be compiled.

*PGM

The program name supplied on the PGM parameter is used as the source member name.

member-name

Enter the name of the member that contains the source code.

Source stream file (SRCSTMF)

Specifies the path name of the stream file containing the source code that you want to compile.

The path name can be either absolutely or relatively qualified. An absolute path name starts with '/'; a relative path name starts with a character other than '/'. If absolutely-qualified, the path name is complete. If relatively-qualified, the path name is completed by pre-pending the job's current working directory to the path name.

The SRCMBR and SRCFILE parameters cannot be specified with the SRCSTMF parameter.

Text 'description' (TEXT)

Specifies the text that briefly describes the program object.

*SRCMBRTXT

The text description associated with the source file member is used for the program object. If the source file is an inline file, a stream file, or a device file, the text will be blank.

*BLANK

Specifies that no text appears.

'description'

Specify no more than 50 characters of text, enclosed in apostrophes.

Output options (OUTPUT)

Specifies whether a compiler listing is produced.

Single Value

*NONE

Does not generate the compiler listing. When a listing is not required, this parameter value should be used to improve compile-time performance. When *NONE is specified, any listing-related parameter values specified for the OPTION parameter are ignored.

Element 1: Output File Name

*PRINT

Generates a spooled file containing the listing.

'path-name'

Specify the path name of a stream file to hold the listing.

Element 2: Title

*BLANK

Specifies that no text appears.

'title'

Specify a title string for the listing file (maximum 80 characters).

Element 3: Subtitle

*BLANK

Specifies that no text appears.

'subtitle'

Specify a subtitle string for the listing file (maximum 80 characters).

Compiler options (OPTION)

Specifies the options to use when the ILE C++ source code is compiled. You can specify them in any order, separated by one or more blanks. When an option is specified more than once, or when two options conflict, the last one specified is used.

The possible options are:

*NOBITSIGN

Specify bitfields as unsigned.

*BITSIGN

Specify bitfields as signed.

*NOEVENTF

Do not create an event file for use by CoOperative Development Environment/400 (CODE/400).

*EVENTF

Create an event file for use by CoOperative Development Environment/400 (CODE/400). The event file is created as a member in file EVFEVENT in the library where the module or program object being created will be stored. If the file EVFEVENT does not exist, it is automatically created. The event file member name is the same as the name of the object being created. CODE/400 uses this file to provide error feedback integrated with the CODE/400 editor. An Event File is normally created when you create a module or program object from within CODE/400.

*NOEXPMAC

Macros are not expanded in the listing unless a syntax error is encountered within the macro.

*EXPMAC

Expand all macros in the listing.

*NOFULL

Do not turn on all listing options.

*FULL

Turn on all listing options.

*NOINCDIRFIRST

Include directories specified as INCDIR parameters are not included before the standard header file include path.

*INCDIRFIRST

Include directories specified as INCDIR parameters are included before the standard header file include path.

*LOGMSG

Puts the compilation messages in the job log.

When you specify this option and the FLAG parameter, messages with the severity specified on the FLAG parameter (and higher) are placed in the job log.

When you specify this option and a maximum number of messages on the MSGLMT parameter, compilation stops when the number of messages, at the specified severity, have been placed in the job log.

*NOLOGMSG

Does not put the compilation messages in the job log.

*LONGLONG

Allows the use of the long long data type.

*NOLONGLONG

Do not allow the use of the long long data type.

*NORTTI

Do not generate run-time type identification (RTTI) information.

*RTTIALL

Generate the information needed for the RTTI typeid and the dynamic_cast operator.

*RTTITYPE

Generate the information needed for the RTTI typeid operator only.

*RTTICAST

Generate the information needed for the dynamic_cast operator only.

*NOSHOWINC

Does not expand the user include files or the system include files in the source section of the listing or in the debug views.

*SHOWINC

Expands both the user include files and the system include files in the source section of the listing or in the debug views. An OUTPUT option, or DBGVIEW parameter value of *ALL, *SOURCE or *LIST must be specified.

*SHOWSRC

Show the source code in the listing. This option can be modified by the *SHOWINC, *SHOWSYS or *SHOWUSR options.

*NOSHOWSRC

Does not show the source code in the listing. This option may be modified by the *EXPMAC, *SHOWINC, *SHOWSYS or *SHOWUSR options.

*NOSHOWSYS

Do not expand the system include files on the #include directive in the source section of the listing or in the debug views. System include files are enclosed in angle brackets (< >) following the #include directive.

*SHOWSYS

Expands the system include files on the #include directive in the source section of the listing or in the debug views. An output option, or DBGVIEW parameter of *ALL, *SOURCE or *LIST must be specified. System include files are enclosed in angle brackets (< >) following the #include directive.

*NOSHOWUSR

Do not expand user include files in the listing or debug views. User include files are enclosed in double quotation marks (" ") following the #include directive.

*SHOWUSR

Expands the user include files on the #include directive in the source section of the listing or in the debug views. An OUTPUT option, or DBGVIEW parameter value of *ALL, *SOURCE or *LIST must be specified. User include files are enclosed in double quotation marks (" ") following the #include directive.

*STDINC

The system-supplied header files are included in the search path for the compile.

*NOSTDINC

The system-supplied header files are not included in the search path for the compile.

*NOSTDLOGMSG

Compilation messages are not sent to the stdout stream.

*STDLOGMSG

Compilation messages are sent to the stdout stream.

*NOSYSINCPATH

The search path for user includes is not affected.

*SYSINCPATH

Changes the search path of user includes to the system include search path. In function this option is equivalent to changing the double-quotes in the user #include directive (#include "file_name") to angle brackets (#include <file_name>).

*NOXREF

Does not generate the cross-reference table in the listing.

*XREF

Generates the cross-reference table containing a list of the identifiers in the source code together with the numbers of the lines in which they appear. An OUTPUT option must be specified.

*NOXREFREF

Do not produce a cross-reference table of referenced identifiers in the listing.

*XREFREF

Produce a cross-reference table of referenced variables, structures, and function names in the listing file. The table shows the line numbers where the identifiers are declared. An OUTPUT option must be specified.

Checkout options (CHECKOUT)

Specifies options you may select to generate informational messages that indicate possible programming errors. When you specify an option more than once, or when two options conflict, the last one specified is used.

*NONE

Disables all of the options for CHECKOUT.

*USAGE

This is equivalent to specifying *COND.

*ALL

Enables all of the options for CHECKOUT.

*NOCLASS

Do not display information about class use.

*CLASS

Display information about class use.

*NOCOND

Do not warn about possible redundancies or problems in conditional expressions.

*COND

Warn about possible redundancies or problems in conditional expressions.

*NOEFFECT

Do not warn about statements with no effect.

*EFFECT

Warn about statements with no effect.

*NOGENERAL

Do not generate general checkout messages.

*GENERAL

Generate general checkout messages.

*NOLANG

Do not display information about the effects of the language level.

*LANG

Display information about the effects of the language level.

*NOPARM

Do not warn about unused parameters.

*PARM

Warn about unused parameters.

*NOPORT

Do not warn about non-portable language constructs.

*PORT

Warn about non-portable language constructs.

*NOREACH

Do not warn about unreachable statements.

*REACH

Warn about unreachable statements.

*NOTEMP

Do not generate messages if the compiler creates temporary variables.

*TEMP

Generate messages if the compiler creates temporary variables.

*NOTRUNC

Do not warn about the possible truncation or loss of data.

*TRUNC

Warn about the possible truncation or loss of data.

*NOUNUSED

Do not check for unused auto or static variables.

*UNUSED

Check for unused auto or static variables.

Optimization (OPTIMIZE)

Specifies the levels of optimization of the generated object.

10

Generated code is not optimized. This level has the shortest compile time. This level allows variables to be displayed and modified while debugging.

20

Some optimization is performed on the code. This level allows user variables to be displayed but not modified while debugging.

30

Full optimization is performed on the generated code. During a debug session, user variables may not be modified but may be displayed. The presented values may not be the current value of the variable.

40

All optimizations done at level 30 are performed on the generated code. In addition, code is eliminated from procedure prologue and epilogue routines that enable instruction trace and call trace system functions. Eliminating this code enables the creation of leaf procedures. A leaf procedure is a procedure that contains no calls to other procedures. Procedure call performance to a leaf procedure is significantly faster than to a normal procedure.

Inline options (INLINE)

Specifies whether the compiler should consider replacing a function call with the called function's instructions. Inlining a function eliminates the overhead of a call and can result in better optimization. Small functions that are called many times are good candidates for inlining.

Element 1: Inliner

Specifies whether or not inlining will be used.

*OFF

Specifies that inlining will not be performed on the compilation unit.

*ON

Specifies that inlining will be performed on the compilation unit. If a debug view is specified, the inliner is turned off.

Element 2: Mode

Specifies whether or not the inliner should attempt to automatically inline functions depending on their Threshold and Limit values.

*NOAUTO

Specifies that only the functions that have been specified with the #pragma inline directive should be considered candidates for inlining.

*AUTO

Specifies that the inliner should determine if a function can be inlined based on the Threshold and Limit values specified. The #pragma noinline directive overrides *AUTO.

Element 3: Threshold

Specifies the maximum size of a function that can be a candidate for automatic inlining. The size is measured in Abstract Code Units (ACUs). ACUs are proportional in size to the executable code in the function. Source code is translated into ACUs by the compiler.

250

Specifies a threshold of 250.

number-of-ACUs

Specifies a threshold from 1 to 65535 ACUs.

*NOLIMIT

Defines the threshold as the maximum size of the program object.

Element 4: Limit

Specifies the maximum relative size a function can grow before auto-inlining stops.

2000

Specifies a limit of 2000 ACUs.

*NOLIMIT

Limit is defined as the maximum size of the program object. System limits may be encountered.

number-of-ACUs

A limit from 1 to 65535 ACUs may be specified.

Element 5: Report

Specifies whether or not to produce an inliner report with the compiler listing.

*NO

The inliner report is not produced.

*YES

The inliner report is produced as part of the compiler listing. An OUTPUT option must be specified to produce the inliner report.

Debugging view (DBGVIEW)

Specifies which level of debugging is available for the module in the created program object. It also specifies which source views are available for source level debugging. Requesting a debug view will turn inlining off.

*NONE

Debug capability is not inserted into the program object.

*ALL

Enables all of the debug options (*STMT, *SOURCE and *LIST)

*STMT

Allows the program object to be debugged using program statement numbers and symbolic identifiers.

Note: To debug a module object using the *STMT option you need a listing.

*SOURCE

Generates the source view for debugging the program object. OPTION parameter values *NOSHOWINC, *SHOWINC, *SHOWSYS, and *SHOWUSR determine the content of the source view created.

Note: In order to use this view for debugging, the root source file should not be modified, renamed or moved after the program object is created.

*LIST

Generates the listing view for debugging the program object. OPTION parameter values *SHOWINC, *SHOWUSR, *SHOWSYS, and *NOSHOWINC determine the content of the listing view created.

Define names (DEFINE)

Specifies preprocessor macros that take effect before the file is processed by the compiler. Using the format DEFINE(macro) is equivalent to DEFINE('macro=1').

*NONE

No macro is defined.

'name' or 'name=value'

A maximum of 32 macros may be defined. Each macro name is enclosed in apostrophes. The maximum length of a macro name is 80 characters. The apostrophes are not part of the 80 character string. The apostrophes are required for case-sensitive macro names.

Note: Macros defined in the command override any macro definition of the same name in the source but a warning message is generated by the compiler. Function-like macros such as #define max(a,b) ((a)>(b):(a)?(b)) cannot be defined on the command line.

Language level (LANGLVL)

Specifies the capabilities of the compiler and which prototypes are declared when the source is created.

*EXTENDED

Defines the preprocessor variable __EXTENDED__ and undefines other language-level variables. This parameter should be used when all the capabilities of ILE C++ are required.

*ANSI

Defines the preprocessor variables __ANSI__, __STDC__ and __cplusplus98_interface__, and undefines other language-level variables. Only ANSI-standard C++ is made available.

*LEGACY

This option allows some of the source constructs acceptable to earlier compilers.

Alias (ALIAS)

Specifies the aliasing assertion to be applied in the program object being created.

*ANSI

The program object will only allow pointers to point to an object of the same type.

*NOANSI

The program object will not use the *ANSI aliasing rules.

*ADDRTAKEN

The program object will have its class of variables disjoint from pointers unless their address is taken.

*NOADDRTAKEN

The program object will not use the *ADDRTAKEN aliasing rules.

*ALLPTRS

The program object will not allow any two pointers to be aliased.

*NOALLPTRS

The program object will not use the *ALLPTRS aliasing rules.

*TYPEPTR

The program object will not allow any two pointers of different types to be aliased.

*NOTYPEPTR

The program object will not use the *TYPEPTR aliasing rules.

System interface options (SYSIFCOPT)

Specifies which system interface options will be used for the program object being created. You can specify them in any order, separated by one or more blanks. When an option is specified more than once, or when two options conflict, the last one specified is used.

*IFS64IO

The program object will use the Integrated File System for 64-bit C stream I/O operations.

*IFSIO

The program object will use the Integrated File System for C stream I/O operations.

*NOIFSIO

The program object will use the iSeries Data Management file system for C stream I/O operations.

Locale object type (LOCALETYPE)

Specifies the type of locale support to be used by the program object being created.

*LOCALE

Program objects created with this option use the locale support provided by *LOCALE objects.

*LOCALEUCS2

Program objects created with this option use the locale support provided by *LOCALE objects. Wide-character types will contain two-byte universal character set values.

*LOCALEUTF

Program objects created with this option use the locale support provided by *LOCALE objects. Wide-character types will contain four-byte utf-32 values. Narrow character types will contain utf-8 values.

Message flagging level (FLAG)

Specifies the level of messages that are to be displayed in the listing.

0

All messages starting at the informational level are displayed.

10

All messages starting at the warning level are displayed.

20

All messages starting at the error level are displayed.

30

All messages starting at the severe error level are displayed.

Message limit (MSGLMT)

Specifies the maximum number of messages at the given message severity that can occur before the compilation is stopped.

Element 1: Message Limit

Specifies the maximum number of messages that can occur at, or above, the message severity level specified.

*NOMAX

Compilation continues regardless of the number of messages that have occurred at the message severity level specified.

message-limit

Specify the number of messages that can occur. The valid range is 0 to 32767.

Element 2: Message Severity

Specifies the message severity that can stop the compilation if the message-limit number of messages at the specified severity or above occur.

30

Specifies that a message-limit of messages at severity 30 can occur before compilation stops.

0

Specifies that a message-limit of messages at severity 0 or above can occur before compilation stops.

10

Specifies that a message-limit of messages at severity 10 or above can occur before compilation stops.

20

Specifies that a message-limit of messages at severity 20 or above can occur before compilation stops.

Replace program object (REPLACE)

Specifies whether the existing version of the object will be replaced by the current version.

*YES

The existing object is replaced by the new version. The old version is moved to the QRPLOBJ library and renamed based on the system date and time. The text description of the replaced object is changed to the name of the original object. The old object is deleted at the next IPL if it has not been explicitly deleted.

*NO

The existing object is not replaced. When an object with the same name is found in the specified library, a message is displayed and compilation stops.

User profile (USRPRF)

Specifies the user profile that is used when the created program object is run, including the authority that the program object has for each object. The profile of either the program owner or the program user is used to control which objects can be used by the program object.

*USER

The profile of the user running the program object is used.

*OWNER

The user profiles of both the program's owner and the program's user are used when the program object is processed. The collective sets of object authority in both user profiles are used to find and access objects during program processing. Authority from the owning user profile's group profile is not included in the authority for the running program object.

Authority (AUT)

Specifies the authority granted to users who do not have specific authority to the object, who are not on the authorization list, or whose group has no specific authority to the object.

*LIBCRTAUT

Public authority for the object is taken from the CRTAUT keyword of the target library (the library that contains the created object). This value is determined when the object is created. When the CRTAUT value for the library changes after the object is created, the new value does not affect any existing objects in the library.

*ALL

Provides authority for all operations on the object except those limited to the owner or controlled by authorization list management authority. Any user can control the object's existence, specify the security for it, change it, and perform basic functions on it, including transfer its ownership.

*CHANGE

Provides all data authority and the authority to perform all operations on the object except those limited to the owner or controlled by object authority and object management authority. The object can be changed and basic functions can be performed on it.

*USE

Provides object operational authority; read authority; and authority for basic read-only operations on the object, such as binding of a module object. Users without specific authority are prevented from changing the object.

*EXCLUDE

Users without special authority cannot access the object.

authorization-list-name

Enter the name of an authorization list of users and authorities to which the object is added. The object is secured by this authorization list, and the public authority for the object is set to *AUTL. The authorization list must exist on the system when the command is issued.

Target release (TGTRLS)

Specifies the release of the operating system on which the user intends to use the object being created.

In the examples given for the *CURRENT and *PRV values, and when specifying the release-level value, the format VxRxMx is used to specify the release, where Vx is the version, Rx is the release, and Mx is the modification level. For example, V4R5M0 is version 4, release 5, modification level 0.

*CURRENT

The object will be used on the release of the operating system currently running on the user's system. For example, if V4R5M5 is running on the system, *CURRENT means the user intends to use the object on a system with V4R5M5 installed. The user can also use the object on a system with any subsequent release of the operating system installed.

Note: If V4R5M5 is running on the system, and the object will be used on a system with V4R5M0 installed, specify TGTRLS(V4R5M0) not TGTRLS(*CURRENT).

*PRV

The object will be used on the previous release with modification level 0 of the operating system. For example, if V4R5M5 is running on the user's system, *PRV means the user intends to use the object on a system with V4R4M0 installed. The user can also use the object on a system with any subsequent release of the operating system installed.

release-level

Specify the release in the format VxRxMx. The object can be used on a system with the specified release or with any subsequent release of the operating system installed.

Valid values depend on the current version, release, and modification level. They change with each new release. If you specify a release level which is earlier than the earliest release level supported by this command, an error message is sent.

Enable performance collection (ENBPFRCOL)

Specifies whether performance measurement code should be generated in the object. The data collected can be used by the system performance tool to profile an application's performance. Generating performance measurement code in a created object will result in slightly larger objects and may affect performance.

*PEP

Performance statistics are gathered on the entry and exit of the program entry procedure only. Choose this value when you want to gather overall performance information for an application.

*ENTRYEXIT *NONLEAF

Performance statistics are gathered on the entry and exit of all procedures of the program object that are not leaf procedures. This includes the program PEP routine.

This choice would be useful if you only wanted to capture information on those routines that invoke other routines in your application.

*ENTRYEXIT *ALLPRC

Performance statistics are gathered on the entry and exit of all the procedures of the program object (including those that are leaf procedures). This includes the program PEP routine.

This choice would be useful if you wanted to capture information on all routines. Use this option when you know that all the program objects called by your application were created with either the *PEP, *ENTRYEXIT or *FULL option. Otherwise, if your application calls other program objects that are not enabled for performance measurement, the performance tool will charge their use of resources against your application. This would make it difficult for you to determine where resources are actually being used.

*FULL *NONLEAF

Performance statistics are gathered on entry and exit of all procedures that are not leaf procedures. Also, statistics are gathered before and after each call to an external procedure.

*FULL *ALLPRC

Performance statistics are gathered on the entry and exit of all procedures including leaf procedures. Also statistics are gathered before and after each call to an external procedure.

Use this option when you think that your application will call other program objects that were not created with either *PEP, *ENTRYEXIT or *FULL. This option allows the performance tools to distinguish between resources that are used by your application and those used by program objects it calls (even if those program objects are not enabled for performance measurement). This option is the most expensive but allows for selectively analyzing various program objects in an application.

Performance options (PFROPT)

Specifies various options available to boost performance. You can specify them in any order, separated by one or more blanks. When an option is specified more than once, or when two options conflict, the last one specified is used.

The possible options are:

*SETFPCA

Causes the compiler to set the floating point computational attributes to achieve ANSI semantics for floating point computations.

*NOSETFPCA

No computational attributes will be set. This option should only be used when the object being created does not have any floating point computations in it.

*NOSTRDONLY

Specifies that the compiler must place strings into writeable memory.

*STRDONLY

Specifies that the compiler may place strings into read-only memory.

Profiling data (PRFDTA)

Specifies the program profiling data attribute for the program object. Program profiling is an advanced optimization technique used to reorder procedures and code within the procedures based on statistical data (profiling data).

*NOCOL

The program object is not enabled to collect profiling data.

*COL

The program object is enabled to collect profiling data. *COL can be specified only when the optimization level is 30 or greater.

Teraspace options (TERASPACE)

Specifies whether the program object is enabled to work with teraspace storage. This includes teraspace storage allocated by the program object and parameters passed from other teraspace-enabled program and service program objects.

Element 1: Teraspace Enabled

*NO

The program object is not enabled to handle addressing of storage allocated from teraspace.

*YES

The program object is enabled to handle addressing of storage allocated from teraspace, including parameters passed from other teraspace-enabled program and service program objects.

Element 2: Use Teraspace Interfaces

*NOTSIFC

The program object will default to use the non-teraspace versions of the storage functions.

*TSIFC

The program object will default to use the teraspace versions of the storage functions. The compiler will define macro variable __TERASPACE__.

Storage model (STGMDL)

Specifies the type of storage to be used by the object created.

*SNGLVL

The object created will use single-level storage.

*TERASPACE

The object created will use teraspace storage.

Data model (DTAMDL)

Specifies the sizes (in bytes) of variables declared as int, long, pointer.

*P128

Causes the sizes of int, long, pointer to be 4, 4, 16 respectively.

*LLP64

Causes the sizes of int, long, pointer to be 4, 4, 8 respectively. The compiler will define the macro __LLP64_IFC__.

Run time Binding (RTBND)

Specifies the run time binding directory for the object created.

*DEFAULT

The object created will use the default binding directory.

*LLP64

The object created will use the 64-bit run time binding directory. This value is only available in conjunction with teraspace storage model, 64-bit data model and teraspace storage functions interface options. The compiler will define the macro __LLP64_RTBND__.

Pack structure (PACKSTRUCT)

Specifies the alignment boundary to use for members of a structure.

*NATURAL

Structure members are aligned on their natural boundaries. For example, a short integer will be two-byte aligned. 16-byte pointers will always align on 16-byte boundaries.

1

Pack structure members on a 1-byte alignment.

2

Pack structure members on a 2-byte alignment.

4

Pack structure members on a 4-byte alignment.

8

Pack structure members on a 8-byte alignment.

16

Pack structure members on a 16-byte alignment.

Enum size (ENUM)

Specifies the number of bytes the compiler uses to represent an enumeration.

*SMALL

Make all enum variables the smallest size that can represent the range of values.

1

Make all enum variables 1 byte.

2

Make all enum variables 2 bytes.

4

Make all enum variables 4 bytes.

*INT

Use the ANSI-standard enum size, which is 4 bytes.

Dependency information (MAKEDEP)

Specifies whether or not to generate dependency information into a file. This information can be used by a make tool.

*NONE

Do not generate dependency information.

'path-name'

Specify a path name for the stream file in which to store the dependency information.

Include directory (INCDIR)

Specifies one or more directories to add to the search path used by the compiler to find include files.

The search path can be further modified by using the following parameters on the OPTION keyword:

• *INCDIRFIRST or *NOINCDIRFIRST
• *SYSINCPATH or *NOSYSINCPATH
• *STDINC or *NOSTDINC

*NONE

Unless modified, the default system include directory and the source directory will be searched for user include files.

'directory'

Specify up to 32 directories in which to search for include files. In addition to the specified directories, the source directory is searched for user include files.

Compiler services option (CSOPT)

Specifies one or more compiler service options. This parameter allows IBM to provide switchable compiler capability between releases.

*NONE

No compiler service option is selected.

'compiler-service-options-string'

The selected compiler service options are used when creating the module object. Valid strings will be described in PTF cover letters or in release notes.

Licensed internal code options (LICOPT)

Specifies one or more Licensed Internal Code compile-time options. This parameter allows individual compile-time options to be selected, and is intended for the advanced programmer who understands the potential benefits and drawbacks of each selected type of compiler option.

The possible values are:

*NONE

No compile-time options are selected.

'Licensed-Internal-Code-options-string'

The selected Licensed Internal Code compile-time options are used when creating the module object. Certain options may reduce your ability to debug the created module object.

Default char type (DFTCHAR)

Specifies the default sign for the char data type.

*UNSIGNED

Make default char type unsigned.

*SIGNED

Make default char type signed.

Target CCSID (TGTCCSID)

Specifies the target coded character set identifier used to describe data stored into the resulting program object.

The possible values are:

*SOURCE

The root source file's CCSID is used.

*JOB

The current job's CCSID is used.

*HEX

The CCSID 65535 is used, which indicates that character data is treated as binary data and is not converted.

coded-character-set-identifier

Specify the CCSID to be used.

Template options (TEMPLATE)

Specifies template options to the compiler.

Element 1: Template Include Directory

*NONE

Templates are not generated.

*TEMPINC

Templates are generated into a directory named tempinc which is created in the directory where the root source file was found. If the source file is not a stream file, a file named TEMPINC will be created in the library where the source file resides. The TEMPLATE(*TEMPINC) and TMPLREG parameters are mutually exclusive.

'directory'

Specify the directory where the compiler will generate templates.

Element 2: Maximum Generated Headers

1

The maximum number of generated headers that contain templates.

number-of-header-files

Specify an integer value from 1 to 99999 for the maximum number of generated header files.

Element 3: Template Validity Checking

Controls whether parsing and semantic checking are applied to template definition implementations or only to template instantiations. The compiler has the option to producte warning or error messages. Available parameters are:

*NO

Do not parse to reduce the number of errors issued in code written for previous versions of the compiler.

*WARN

Issue warning messages for semantic errors. Issue error messages for errors found while parsing.

*ERROR

Treat problems in template implementations as errors, even if the template is not instantiated.

Examples

None

Error messages

*ESCAPE Messages

CZS1613

The compilation failed.