The Change Line Description (Token-Ring Network) (CHGLINTRN) command changes a line description for a token-ring network line.

Parameters

Keyword	Description	Choices	Notes
LIND	Line description	Name	Required, Key, Positional 1
RSRCNAME	Resource name	Name, *SAME, *NWID, *NWSD	Optional
ONLINE	Online at IPL	*SAME, *YES, *NO	Optional
VRYWAIT	Vary on wait	15-180, *SAME, *NOWAIT	Optional
MAXCTL	Maximum controllers	1-256, *SAME	Optional
LINESPEED	Line speed	*SAME, 4M, 16M, 100M, *AUTO, *NWI	Optional
DUPLEX	Duplex	Character value, *SAME, *HALF, *FULL, *AUTO	Optional
MAXFRAME	Maximum frame size	265-16393, *SAME, 265, 521, 1033, 1466, 1600, 1994, 4060, 8156, 16393	Optional
LECFRAME	LEC frame size	*SAME, 1516, 4544, 9234, 18190	Optional
ACTLANMGR	Activate LAN manager	*SAME, *YES, *NO	Optional
TRNLOGLVL	TRLAN manager logging level	*SAME, *OFF, *MIN, *MED, *MAX	Optional
TRNMGRMODE	TRLAN manager mode	*SAME, *OBSERVING, *CONTROLLING	Optional
LOGCFGCHG	Log configuration changes	*SAME, *LOG, *NOLOG	Optional
TRNINFBCN	Token-ring inform of beacon	*SAME, *YES, *NO	Optional
ADPTADR	Local adapter address	Character value, *SAME, *ADPT	Optional
FCNADR	Functional address	Single values: *SAME, *NONE Other values (up to 31 repetitions): C00000000001, C00000000002, C00000000004, C00000000008, C00000000010, C00000000020, C00000000040, C00000000080, C00000000100, C00000000200, C00000000400, C00000000800, C00000001000, C00000002000, C00000004000, C00000008000, C00000010000, C00000020000, C00000040000, C00000080000, C00000100000, C00000200000, C00000400000, C00000800000, C00001000000, C00002000000, C00004000000, C00008000000, C00010000000, C00020000000, C00040000000	Optional
SSAP	SSAP list	Single values: *SAME, *SYSGEN Other values (up to 24 repetitions): Element list	Optional
	Element 1: Source service access point	02-FE
	Element 2: SSAP maximum frame	265-16393, *MAXFRAME, 265, 521, 1033, 1466, 1994, 4060, 8156, 16393
	Element 3: SSAP type	*CALC, *NONSNA, *SNA, *HPR
ELYTKNRLS	Early token release	*YES, *NO, *SAME, *LINESPEED	Optional
THRESHOLD	Error threshold level	*SAME, *OFF, *MIN, *MED, *MAX	Optional
PVCID	PVC identifiers	Single values: *SAME Other values: Element list	Optional
	Element 1: Virtual path identifier	0-7
	Element 2: Virtual circuit identifier	32-4095
USELECSADR	Use LECS address	*SAME, *YES, *NO	Optional
LESATMADR	LES ATM address	Single values: *SAME, *NONE Other values: Element list	Optional
	Element 1: Network prefix	Hexadecimal value
	Element 2: End system identifier	Hexadecimal value
	Element 3: Selector byte	Hexadecimal value
EMLLANNAME	Emulated LAN name	Character value, *SAME, *NONE	Optional
LECDSCTIMO	LEC disconnect time out	1-30, *SAME, *NOMAX	Optional
LINKSPEED	Link speed	1200-603979776000, *SAME, 4M, 10M, 16M, 100M, *MIN, *MAX	Optional
COSTCNN	Cost/connect time	0-255, *SAME	Optional
COSTBYTE	Cost/byte	0-255, *SAME	Optional
SECURITY	Security for line	*SAME, *NONSECURE, *PKTSWTNET, *UNDGRDCBL, *SECURECND, *GUARDCND, *ENCRYPTED, *MAX	Optional
PRPDLY	Propagation delay	*SAME, *MIN, *LAN, *TELEPHONE, *PKTSWTNET, *SATELLITE, *MAX	Optional
USRDFN1	User-defined 1	0-255, *SAME	Optional
USRDFN2	User-defined 2	0-255, *SAME	Optional
USRDFN3	User-defined 3	0-255, *SAME	Optional
AUTOCRTCTL	Autocreate controller	*YES, *NO, *SAME	Optional
AUTODLTCTL	Autodelete controller	1-10000, *NONE, *SAME	Optional
CMNRCYLMT	Recovery limits	Single values: *SAME, *SYSVAL Other values: Element list	Optional
	Element 1: Count limit	0-99
	Element 2: Time interval	0-120
MSGQ	Message queue	Single values: *SAME, *SYSVAL, *SYSOPR Other values: Qualified object name	Optional
	Qualifier 1: Message queue	Name
	Qualifier 2: Library	Name
TEXT	Text 'description'	Character value, *SAME, *BLANK	Optional

Top

Line description (LIND)

Specifies the name of the line description

This is a required parameter.

Resource name (RSRCNAME)

Specifies the resource name that identifies the hardware the description represents.

Note: Use the Work with Hardware Resources (WRKHDWRSC) command with *CMN specified for the TYPE parameter to help determine the resource name. The resource name is on the port. For example, the resource name may be CMN01 on an Ethernet port.

Note: The value specified on the RSRCNAME parameter cannot be changed from *NWSD to another value or from another value to *NWSD.

*SAME

The value does not change.

*NWID

The resource name specified on the attached frame relay network interface description is used.

*NWSD

The resource name is determined by the network server description used.

name

Specify the resource name of the communications port.

This is a required parameter.

Online at IPL (ONLINE)

Specifies whether this object is automatically varied on at initial program load (IPL).

*SAME

The value does not change.

*YES

The line is automatically varied on at initial program load (IPL).

*NO

This line is not automatically varied on at IPL.

Vary on wait (VRYWAIT)

Specifies whether the line is varied on asynchronously or synchronously. For synchronous vary on, this parameter specifies how long the system waits for the vary on to complete.

*SAME

The value does not change.

*NOWAIT

The system does not wait for vary on completion. The line is varied on asynchronously.

vary-on-wait

Specify the time (in seconds) to wait. Valid values range from 15 through 180. The system waits until the line is varied on, or until the specified time passes, before completing the Vary Configuration (VRYCFG) command.

Notes:

1. When ONLINE(*YES) is used, specifying a wait time in the line description affects system IPL time. In such cases, system IPL time is influenced by the amount of time required to synchronously vary on the line or reach the wait-time value.
2. The time required to vary on a line is the time it takes to:
   • Put tasks in place to manage the line
   • Activate the communications I/O processor (IOP), including downloading the IOP model-unique Licensed Internal Code
   • Establish the communications tasks and processes

Normal vary-on time ranges from 5 through 45 seconds, but can be longer, depending on the system, line protocol, and other factors.

Maximum controllers (MAXCTL)

Specifies the maximum number of controllers that the line supports.

*SAME

The value does not change.

maximum-controllers

Specify value ranging from 1 to 256. The number must be large enough to account for all of the controllers that are currently active to this line, and for those controllers you know will be attached in the near future.

Line speed (LINESPEED)

Specifies the line speed in bits per second (bps).

Note: When RSRCNAME(*NWID) and NWITYPE(*FR) are specified, *NWI must be specified on this parameter.

*SAME

The value does not change.

4M

The line speed is 4M bps.

16M

The line speed is 16M bps.

100M

The line speed is 100M bps.

*AUTO

The line speed value will be determined by the hardware using auto-negotiation.

*NWI

The line speed used is for a network interface.

Note: LINESPEED(*NWI) is only valid when RSRCNAME(*NWID) and NWITYPE(*FR) are specified.

Duplex (DUPLEX) parameter set to *AUTO, if it has a default value and line speed (LINESPEED) parameter has 100M or *AUTO.

Duplex (DUPLEX)

Specifies whether the hardware can send and receive data simultaneously. In half duplex mode, the hardware must alternate between sending data and receiving data. In full duplex mode, one cable is dedicated to send data and another cable is dedicated to receive data. Therefore, data can be sent and received simultaneously. A hub is required for full duplex.

*SAME

The value does not change.

*HALF

The line communicates using half duplex mode.

*FULL

The line communicates using full duplex mode.

*AUTO

The duplex value will be determined by the hardware using auto-negotiation.

Note: Duplex (DUPLEX) parameter set to *AUTO, if it has a default value and line speed (LINESPEED) parameter has 100M or *AUTO.

Maximum frame size (MAXFRAME)

Specifies the maximum frame size that can be transmitted and received on this line description.

*SAME

The value does not change.

maximum-frame-size

Specify the maximum frame size value to be used. The valid frame sizes (in bytes) range from 265 through 8148 bytes when the network interface is a frame relay. Otherwise, valid frame sizes (in bytes) range from 265 through 16393.

Note: This parameter is no longer supported. It exists solely for compatibility with releases earlier than Version 5 Release 3 Modification 0 of the operating system.

LEC frame size (LECFRAME)

Specifies the LAN emulation client (LEC) frame size that can be transmitted and received on this line description.

Note: MAXFRAME must always be at least 20 less than this field.

*SAME

The value does not change.

4544

The LEC frame size is 4544 bytes.

1516

The LEC frame size is 1516 bytes.

9234

The LEC frame size is 9234 bytes.

18190

The LEC frame size is 18190 bytes.

Activate LAN manager (ACTLANMGR)

Specifies whether Local Area Network (LAN) Manager is activated for this line.

NOTES:

1. ACTLANMGR(*YES) must be specified when RSRCNAME(*NWID) is specified.
2. ACTLANMGR(*NO) will ignore the values in TRNLOGLVL, TRNMGRMODE, LOGCFGCHG, and TRNINFBCN.

*SAME

The value does not change.

*YES

LAN manager support is activated for this line.

*NO

LAN manager support is not activated for this line.

TRLAN manager logging level (TRNLOGLVL)

Specifies the error logging level used by the TRLAN Manager.

Note: TRNLOGLVL(*OFF) must be specified when RSRCNAME(*NWID) is specified.

*SAME

The value does not change.

*OFF

All error reporting on the specified line is stopped.

*MIN

The minimum reporting level, which reports only conditions that indicate degraded performance, is used.

*MED

The medium reporting level, which reports conditions that indicate potential degraded performance in addition to the minimum reporting level, is used.

*MAX

The maximum reporting level, which reports all error conditions, including the information that would be reported for *MIN and *MED reporting levels, is used.

TRLAN manager mode (TRNMGRMODE)

Specifies which mode of network manager will be active on this line. A controlling manager can do functions that an observing manager can not do such as removing stations and performing a path test.

However, only one controlling manager should be active on any one ring.

Note: TRNMGRMODE(*OBSERVING) must be specified when RSRCNAME(*NWID) is specified.

*SAME

The value does not change.

*OBSERVING

This line's manager will function as an observing network manger.

*CONTROLLING

This line's manager will function as a controlling network manger.

Log configuration changes (LOGCFGCHG)

Specifies if this line's network manager will keep track of changes that happen to the nearest active upstream neighbor (NAUN).

Note: LOGCFGCHG(*LOG) must be specified when RSRCNAME(*NWID) is specified.

*SAME

The value does not change.

*LOG

The line manager logs the changes.

*NOLOG

This line's manager will not log changes.

Token-ring inform of beacon (TRNINFBCN)

Specifies if this line's network manager will send a message to the QSYSOPR message queue when a beaconing condition occurs.

Note: TRNINFBCN(*YES) must be specified when RSRCNAME(*NWID) is specified.

*SAME

The value does not change.

*YES

This line's manager will send a message to the QSYSOPR message queue when a beaconing condition occurs.

*NO

This line's manager will not send a message to the QSYSOPR message queue when a beaconing condition occurs but will instead log an entry in the QHST log.

Local adapter address (ADPTADR)

Specifies the local system's token-ring adapter address.

*SAME

The value does not change.

*ADPT

This value gives the user the present token-ring address for this token-ring adapter card. This address can be shown by using the Display Line Description (DSPLIND) command for this line description after it has successfully varied on.

Note: This value is not valid when RSRCNAME(*NWID) and NWITYPE(*FR) are specified, or RSRCNAME(*NWSD) is specified.

local-adapter-address

Specify an adapter address of your choice to describe this system in the token-ring network. Valid values are hexadecimal 400000000000 through 7FFFFFFFFFFF.

Functional address (FCNADR)

Specifies whether token ring functional addresses are used.

*SAME

The value does not change.

*NONE

A functional address is not used.

functional-address

Specify a group of hexadecimal functional addresses that are encoded in bit-significant format. Valid values range from hex C00000000001 through hex C00040000000. The first digit must be C. Functional addresses must be unique.

Active Monitor

C00000000001

Ring Parameter Server

C00000000002

Network Server Heartbeat

C00000000004

Ring Error Monitor

C00000000008

Configuration Report Server

C00000000010

Synchronous Bandwidth Manager

C00000000020

Locate Directory Server

C00000000040

NetBIOS

C00000000080

Bridge

C00000000100

IMPL Server

C00000000200

Ring Authorization Server

C00000000400

LAN Gateway

C00000000800

Ring Wiring Concentration

C00000001000

LAN Manager

C00000002000

User-defined

C00000004000 through C00040000000

SSAP list (SSAP)

Specifies the source service access point (SSAP) information, including an SSAP value, a maximum frame size, and an SSAP type.

You can enter multiple values for this parameter.

The possible source service access point values are:

*SAME

The value does not change.

*SYSGEN

The system generates the source service access points 04, 06 or AA.

The possible SSAPs value is:

source-service-access-point

Specify a source service access point for receiving and transmitting data. A maximum of 24 SSAP values can be specified.

• For Transmission Control Protocol/Internet Protocol (TCP/IP) applications, the SSAP must be AA.
• For Systems Network Architecture (SNA) applications, the SSAP must be a hex value ranging from 04 through 9C in multiples of four (04, 08, 0C, and so on).
• For high-performance routing (HPR) applications, the SSAP must be hex C8.
• For non-SNA applications, the SSAP must be a hex value ranging from 02 through FE in multiples of two (02, 04, 06, and so on).

• For local area network (LAN) printer applications, specify hex 12 for the SSAP value and *NONSNA for the SSAP type.

The possible SSAP maximum frame size values are:

*MAXFRAME

The system uses the value specified on the MAXFRAME parameter of this command for the SSAP maximum frame size.

SSAP-maximum-frame

Specify the maximum SSAP frame size (the maximum size of the data field that can be transmitted or received). When RSRCNAME(*NWID) and NWITYPE(*FR) are specified, valid values for this parameter range from 265 through 8148 bytes. Otherwise, valid values for this parameter range from 265 through 16393 bytes.

Note: This value cannot be larger than the value specified on the MAXFRAME parameter.

The possible SSAP type values are:

*CALC

The system calculates the value to use.

*SNA

The SSAP used is used for SNA communications. Valid values range from 04 through hex 9C in multiples of four (04, 08, 0C, and so on).

*NONSNA

The SSAP is used for non-SNA communications. Valid values range from hex 02 through hex FE in multiples of two (02,04, 06, and so on).

*HPR

The SSAP is used for HPR communications. It also can be used for SNA applications. The valid value is hex C8.

Early token release (ELYTKNRLS)

Specifies if the early token release option is used by this line.

Note: ELYTKNRLS(*LINESPEED) must be specified when RSRCNAME(*NWID) is specified.

*SAME

The value does not change.

*LINESPEED

This line's LINESPEED parameter will select if the early token release option will be used or not used.

*YES

This line will use the early token release option.

*NO

This line will not use the early token release option.

Error threshold level (THRESHOLD)

This parameter, and its values *SAME, *OFF, *MIN, *MED, and *MAX, can be specified but it is not used by the system starting in release V2R3M0. The parameter may be removed in a later release.

*SAME

The value does not change.

Note: This parameter is no longer supported. It exists solely for compatibility with releases earlier than Version 5 Release 3 Modification 0 of the operating system.

PVC identifiers (PVCID)

Specifies the virtual path identifier and virtual circuit identifier pairs associated with this permanent virtual circuit.

*SAME

The value does not change.

The possible Virtual Path Identifier value is:

virtual-path-id

Specify a number that represents the virtual path identifier. This number must be in the range of 0 to 7.

The possible Virtual Circuit Identifier value is:

virtual-circuit-id

Specify a number that represents the virtual circuit identifier. This number must be in the range of 32 to 4095.

Note: This parameter is no longer supported. It exists solely for compatibility with releases earlier than Version 5 Release 3 Modification 0 of the operating system.

Use LECS address (USELECSADR)

Specifies whether the LAN emulation configuration server (LECS) should be connected to request the remote LAN emulation server (LES) address.

*SAME

The value does not change.

*YES

The LECS address is used.

*NO

The LECS address is not used.

Note: This parameter is no longer supported. It exists solely for compatibility with releases earlier than Version 5 Release 3 Modification 0 of the operating system.

LES ATM address (LESATMADR)

Specifies the ATM network address of the remote LAN emulation server.

Note: This parameter cannot be *NONE if USELECSADR(*NO) is specified.

*SAME

The value does not change.

The possible Single Value is:

*NONE

The ATM network address is not used.

The possible Network prefix value is:

network-prefix

Specify the network prefix of the ATM address of the remote server. This is a 26 digit hexadecimal value.

The possible End system identifier value is:

end-system-identifier

Specify the end system identifier of the remote server. This is a 12 digit hexadecimal value.

The possible Selector byte value is:

selector byte

Specify the selector byte of the remote server. This is a two digit hexadecimal value.

Note: This parameter is no longer supported. It exists solely for compatibility with releases earlier than Version 5 Release 3 Modification 0 of the operating system.

Emulated LAN name (EMLLANNAME)

Specifies the emulated LAN name.

*SAME

The value does not change.

*NONE

The emulated LAN name not used.

emulated-LAN-name

Specify the emulated LAN name. A maximum of 32 characters can be specified.

Note: This parameter is no longer supported. It exists solely for compatibility with releases earlier than Version 5 Release 3 Modification 0 of the operating system.

LEC disconnect time out (LECDSCTIMO)

Specifies the amount of time in minutes a LAN emulation (LE) client waits before disconnecting an idle virtual circuit connection to another client.

*SAME

The value does not change.

*NOMAX

The LE client waits indefinitely.

LEC-disconnect-timeout

Specify the number of minutes the LE client waits before disconnecting an idle virtual circuit connection to another client. The value must be in the range of 1 to 30 minutes.

Link speed (LINKSPEED)

Specifies the link speed in bits per second (bps). This parameter is valid only if advanced peer-to-peer networking (APPN) is used on the system.

*SAME

The value does not change.

4M

The link speed is 4 million bits per second.

10M

The link speed is 10 million bits per second.

16M

The link speed is 16 million bits per second.

100M

The link speed is 100 million bits per second.

*MIN

A link speed of less than 1200 bps is used.

*MAX

A link speed greater than 100M bps is used.

link-speed

Specify the link speed. Valid values range from 1200 to 603979776000 bps.

Cost/connect time (COSTCNN)

Specifies the relative cost of being connected on the line. This parameter is required only if APPN is used on the system.

*SAME

The value does not change.

cost-per-connect-time

Specify a value ranging from 0 through 255.

Cost/byte (COSTBYTE)

Specifies the relative cost per byte for sending and receiving data on the line. This parameter is required only if APPN is used on the system.

*SAME

The value does not change.

cost-per-byte

Specify a value ranging from 0 through 255.

Security for line (SECURITY)

Specifies the security level of the physical line. This parameter is valid only if APPN is used on the system.

*SAME

The value does not change.

*NONSECURE

There is no security on the line.

*PKTSWTNET

A packet switched network is used. Data does not always follow the same path through the network.

*UNDRGRDCBL

An underground cable is used.

*SECURECND

A secure, but unguarded, conduit is used.

*GUARDCND

A guarded conduit, protected against physical tapping, is used.

*ENCRYPTED

Data flowing on the line is encrypted.

*MAX

A guarded conduit, protected against physical and radiation tapping is used.

Propagation delay (PRPDLY)

Specifies the level of propagation delay on the line. This parameter is valid only if advanced peer-to-peer networking (APPN) is used on the system. The order of the values from shortest to longest delay is *MIN, *LAN, *TELEPHONE, *PKTSWTNET, and *SATELLITE.

*SAME

The value does not change.

*LAN

Propagation delay using a local area network.

*MIN

The minimum propagation delay is used.

*TELEPHONE

Propagation delay using telephone lines.

*PKTSWTNET

Propagation delay using a packet switched network.

*SATELLITE

Propagation delay using satellite communications.

*MAX

The maximum propagation delay is used.

User-defined 1 (USRDFN1)

Specifies the first of the three user-defined fields. This field is used to describe unique characteristics of the line that is controlled. This parameter is valid only if APPN is used on the system.

Note: Information about the values that are specified for this parameter is provided in the APPN Support information in the iSeries Information Center at http://www.iseries.ibm.com/infocenter.

*SAME

The value does not change.

user-defined-1

Specify a value ranging from 0 through 255.

User-defined 2 (USRDFN2)

Specifies the second of the three user-defined fields. This field is used to describe unique characteristics of the line that is controlled. This parameter is valid only if APPN is used on the system.

Note: Information about the values that are specified for this parameter is provided in the APPN Support information in the iSeries Information Center at http://www.iseries.ibm.com/infocenter.

*SAME

The value does not change.

user-defined-2

Specify a value ranging from 0 through 255.

User-defined 3 (USRDFN3)

Specifies the third of the three user-defined fields. This field is used to describe unique characteristics of the line that is controlled. This parameter is valid only if APPN is used on the system.

Note: Information about the values that are specified for this parameter is provided in the APPN Support information in the iSeries Information Center at http://www.iseries.ibm.com/infocenter.

*SAME

The value does not change.

user-defined-3

Specify a value ranging from 0 through 255.

Autocreate controller (AUTOCRTCTL)

Specifies whether the system automatically creates an advanced program-to-program communications (APPC) controller description when an incoming advanced peer-to-peer networking (advanced peer-to-peer networking (APPN)) call is received from an adjacent system on the Local Area Network (LAN).

*SAME

The value does not change.

*NO

A controller description is not automatically created for this line.

*YES

A controller description is automatically created for this line.

Autodelete controller (AUTODLTCTL)

Specifies how many minutes the system waits before automatically varying off and deleting automatically created advanced program-to-program communications (APPC) controller descriptions (associated with this line) which have gone to an idle state.

*SAME

The value does not change.

*NONE

The controller descriptions for this line are not automatically deleted.

auto-delete-controller

Specify a value ranging from 1 through 10000 minutes. The value 1440 is 24 hours.

Recovery limits (CMNRCYLMT)

Specifies the second-level communications recovery limits to be used for this line description.

The possible count-limit values are:

*SAME

The value does not change.

*SYSVAL

The value in the QCMNRCYLMT system value is used.

count-limit

Specify the number of recovery attempts to be performed by the system. Valid values range from 0 through 99.

The possible time-interval values are:

*SAME

The value does not change.

time-interval

Specify the number of minutes within which recovery attempts are made. Valid values range from 0 through 120 in 1-minute intervals.

Message queue (MSGQ)

Specifies the message queue to which operational messages are sent.

*SAME

The value does not change.

*SYSVAL

Messages are sent to the message queue defined in the QCFGMSGQ system value.

*SYSOPR

Messages are sent to the system operator message queue (QSYS/QSYSOPR).

Qualifier 1: Message queue

name

Specify the name of the message queue to which operational messages are sent.

Qualifier 2: Library

name

Specify the name of the library where the message queue is located.

Text 'description' (TEXT)

Specifies text that briefly describes the line description.

*SAME

The value does not change.

*BLANK

Text is not specified.

character-value

Specify no more than 50 characters of text, enclosed in apostrophes.

Examples

CHGLINTRN   LIND(TRLAN1)  MAXCTL(50)

This command changes the maximum number of controllers for line description TRLAN1 to 50.

Error messages

*ESCAPE Messages

CPF261E

Line description &1 not changed.