| Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Change Keyboard Map (CHGKBDMAP) command allows the user to change the PA (Program Attention) and PF (Program Function) key assignment defaults. This command changes the specified F-to-PF map to the device on which the command was entered (if it is a 3270 work station device), or to the 3270 work station specified if the user has authority to that device. More information on user-assignable keyboard mapping is in Remote Work Station Support book, SC41-5402 book.
| Top |
| Keyword | Description | Choices | Notes |
|---|---|---|---|
| DEV | Device | Name, *REQUESTER | Optional, Positional 1 |
| PF1 | PF1 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF2 | PF2 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF3 | PF3 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF4 | PF4 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF5 | PF5 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF6 | PF6 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF7 | PF7 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF8 | PF8 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF9 | PF9 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF10 | PF10 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF11 | PF11 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF12 | PF12 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF13 | PF13 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF14 | PF14 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF15 | PF15 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF16 | PF16 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF17 | PF17 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF18 | PF18 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF19 | PF19 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF20 | PF20 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF21 | PF21 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF22 | PF22 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF23 | PF23 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PF24 | PF24 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF1 | PA1-PF1 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF2 | PA1-PF2 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF3 | PA1-PF3 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF4 | PA1-PF4 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF5 | PA1-PF5 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF6 | PA1-PF6 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF7 | PA1-PF7 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF8 | PA1-PF8 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF9 | PA1-PF9 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF10 | PA1-PF10 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF11 | PA1-PF11 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA1PF12 | PA1-PF12 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF1 | PA2-PF1 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF2 | PA2-PF2 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF3 | PA2-PF3 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF4 | PA2-PF4 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF5 | PA2-PF5 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF6 | PA2-PF6 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF7 | PA2-PF7 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF8 | PA2-PF8 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF9 | PA2-PF9 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF10 | PA2-PF10 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF11 | PA2-PF11 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| PA2PF12 | PA2-PF12 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
| Top |
Specifies a valid 3270 display station that is assigned keyboard changes by using the keyboard mapping command. The user must have allocation authority to the specified device before entering the command. In a program environment, the user should either acquire or allocate the specified device before entering this command.
The possible values are:
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
| Top |
CHGKBDMAP PF1(*F1) PA1PF1(*HELP)
This command would be entered if the user is generally satisfied with the keyboard mapping (either the default mapping or a user-defined mapping) except for one or two PF key assignments. No other PF key sequences are affected by this command. The above command could also be started in the program that started the application (thus tailoring the work station to whatever application is run).
| Top |
*ESCAPE Messages
| Top |