Add CRQ Activity (ADDCRQA)

The Add Change Request Activity (ADDCRQA) command adds a change management activity to a change request description. The change management action that is to be performed by the added activity depends on the value specified on the action parameter.

The activity can be conditioned so that it will only run after one or more other activities have completed (successfully or unsuccessfully). The activity may also be scheduled to run at a date and time in the future.

Restrictions:

You must have *CHANGE authority to the change request description object and *EXECUTE authority to the library.
If a node list (NODL) value is specified, the node list can only contain entries that have a value of *SNA for the address type.
Global names or component names must be 64 characters or less including one separator character between tokens.

Note: If you need to cancel an installation of a NetView Distribution Manager (NetView DM) change file or other non-i5/OS object, you must use the Add Change Management Activity (QNSADDCM) API.

Parameters

Keyword	Description	Choices	Notes
CRQD	Change request description	Qualified object name	Required, Positional 1
	Qualifier 1: Change request description	Name
	Qualifier 2: Library	Name, LIBL, CURLIB
ACTIVITY	Activity	Name, GEN, LAST	Optional, Positional 2
ACTION	Action	ACP, ACT, DLT, INS, RMV, RTV, RUN, SND, SNDINS, SNDRUN, *UNINS	Optional, Positional 3
GLBNAME	Global name	Element list	Optional
	Element 1: Global name token 1	Character value, NETID, SERVER, TARGET, MDDATE, *MDTIME
	Element 2: Global name token 2	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 3: Global name token 3	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 4: Global name token 4	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 5: Global name token 5	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 6: Global name token 6	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 7: Global name token 7	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 8: Global name token 8	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 9: Global name token 9	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 10: Global name token 10	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
COMPNAME	Component name	Element list	Optional
	Element 1: Component name token 1	Character value, *NETID
	Element 2: Component name token 2	Character value, NETID, CPNAME
	Element 3: Component name token 3	Character value, NETID, CPNAME
	Element 4: Component name token 4	Character value, NETID, CPNAME
	Element 5: Component name token 5	Character value, NETID, CPNAME
	Element 6: Component name token 6	Character value, NETID, CPNAME
	Element 7: Component name token 7	Character value, NETID, CPNAME
NODL	Managed systems node list	Element list	Optional
	Element 1: Node list	Single values: NONE Other values: Qualified object name*
	Qualifier 1: Node list	Name
	Qualifier 2: Library	Name, LIBL, CURLIB
CPNAME	Managed system node names	Single values: NONE Other values (up to 50 repetitions): Element list*	Optional
	Element 1: Network identifier	Communications name, *NETATR
	Element 2: Control point	Character value
TEXT	Text 'description'	Character value, GEN, BLANK	Optional
ACTFRC	Activation force	Single values: YES Other values: Element list*	Optional
	Element 1: Activation force	*NO
	Element 2: Delay units	SECONDS, MINUTES, *HOURS
	Element 3: Delay period	1-65535, 3600
ACTUSEACT	Activation use on activate	BOTH, PROD, LAST, NONE	Optional
CPRTYPE	Compression type	ADAPTIVE, SNA, USER, NONE	Optional
SNACPRCHR	SNA compression character	Hexadecimal value, *BLANK	Optional
USRCPRINF	User compression information	Element list	Optional
	Element 1: User compression name	Name
	Element 2: User parameters	Character value
CPRSTGSTT	Compression storage state	DECOMPRESS, COMPRESS, *NONE	Optional
CPRTFRSTT	Compression transfer state	DECOMPRESS, COMPRESS, *NONE	Optional
ACTUSEINS	Activation use on install	PROD, TRIAL	Optional
ALTACTCOMP	Alter active components	ALLOWED, NOTALLOWED, *NONE	Optional
AUTOACP	Auto accept	Single values: NONE, NO Other values: Element list	Optional
	Element 1: Auto accept	YES, DESIRED
	Element 2: Delay days	0-255
AUTORMV	Auto remove	YES, NO, DESIRED, NONE	Optional
PRETEST	Pre test	YES, NO, *DESIRED	Optional
POSTTEST	Post test	YES, NO, *DESIRED	Optional
ALWRMV	Allow remove	NO, DESIRED, *YES	Optional
PARM	Initiate parameters	Values (up to 40 repetitions): Not restricted	Optional
KEEPOBJ	Keep object	YES, NO, *NONE	Optional
COREQCHGNL	Corequisite change name list	Single values: NONE Other values: Element list*	Optional
	Element 1: Global name	Values (up to 6 repetitions): Element list
	Element 1: Global name token 1	Character value
	Element 2: Global name token 2	Character value
	Element 3: Global name token 3	Character value
	Element 4: Global name token 4	Character value
	Element 5: Global name token 5	Character value
	Element 6: Global name token 6	Character value
	Element 7: Global name token 7	Character value
	Element 8: Global name token 8	Character value
	Element 9: Global name token 9	Character value
	Element 10: Global name token 10	Character value
REPLACE	Replace object	YES, ALLOWED, *NO	Optional
TODLTNAME	To be deleted name	Single values: NONE Other values: Element list*	Optional
	Element 1: To be deleted name token 1	Character value, NETID, SERVER, TARGET, MDDATE, *MDTIME
	Element 2: To be deleted name token 2	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 3: To be deleted name token 3	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 4: To be deleted name token 4	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 5: To be deleted name token 5	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 6: To be deleted name token 6	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 7: To be deleted name token 7	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 8: To be deleted name token 8	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 9: To be deleted name token 9	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
	Element 10: To be deleted name token 10	Character value, ANY, HIGHEST, LOWEST, NETID, CPNAME, SERVER, TARGET, MDDATE, *MDTIME
REFLVL	Refresh level	Character value	Optional
FRCUNINS	Force uninstall	YES, NO	Optional
RMTSTRTIME	Start time on managed system	Single values: NONE Other values: Element list*	Optional
	Element 1: Time zone	LCLSYS, MGDSYS
	Element 2: Start after	Element list
	Element 1: Time	Time, *CURRENT
	Element 2: Date	Date, CURRENT, NEXT
COND	Activity conditions	Single values: NONE Other values (up to 5 repetitions): Element list*	Optional
	Element 1: Activity	Generic name, name, *PRV
	Element 2: Relational operator	EQ, GT, LT, LE, NE, GE
	Element 3: End code	0-99, SUCCESS, FAIL, NOTRUN, ANY
	Element 4: Condition mode	ALLNODES, SAMENODE
STRTIME	Activity start time	Element list	Optional
	Element 1: Start after	Element list
	Element 1: Time	Time, *CURRENT
	Element 2: Date	Date, CURRENT, NEXT
	Element 2: Start before	Element list
	Element 1: Time	Time, ANY, CURRENT
	Element 2: Date	Date, ANY, CURRENT, *NEXT
HOLD	Hold activity	NO, YES	Optional

Top

Change request description (CRQD)

Specifies the change request description object name.

The possible values are:

*LIBL: All of the libraries in your library list and in the system portions of the job's library list are searched.
*CURLIB: The current library for the job is used to locate the object.
library-name: Specify that only the library named in this parameter is searched.

The possible change request description value is:

change-request-description: Specify the name of the change request description object.

Activity (ACTIVITY)

Specifies the name of the activity to add to the change request description.

*GEN: An activity name will be generated. The activity name is of the form QACTxxxxxx where xxxxxx is the first multiple of ten not already being used.
*LAST: The activity is the last to run in the change request. When *LAST is specified for the activity (ACTIVITY) parameter, the condition (COND) parameter and the start time (STRTIME) parameter cannot be specified. Only one activity named *LAST can exist in the change request description.
activity-name: Specify a 10-character activity name.

Action (ACTION)

Specifies the change management action to be performed by the added activity.

*ACP: Causes the managed system to accept a previously installed object. The activity relinquishes resources at a managed system required to maintain removability of a change. This cancels the removability of a change previously installed in a removable manner. The resources released are, typically, unaltered versions of components affected by the change.
*ACT: Causes the managed system to activate all previously installed changes. Each managed system implements the activation in its own way. For example, the activity performs an initial program load (IPL) of a managed iSeries system or activates a configuration on a PS/2 and causes the PS/2 to restart.
*DLT: Requests a delete action at one or more managed systems.
*INS: Requests the installation of up to seven objects. The objects are treated as corequisites, which means that either all installations succeed or all do not. The activity uses an object and its corequisites, if any, to alter all components necessary to effect the change. The managed system can perform such alteration in a removable manner if required, so that a subsequent request (remove) can return all those components to their original condition prior to the alteration. Also automatic removal or automatic acceptance is possible.
*RMV: The activity, when run at the managed system, returns (that is, removes) all components previously altered in connection with a change to their condition prior to the installation of the change. This is possible only for changes previously installed in a removable manner.
*RTV: Retrieves an object identified by its global name, from a managed system or from another central site system, for storage at the central site system. To retrieve an object from more than one system, a global name with an *ANY token is required, so that each retrieved object has a unique global name. Global names with unspecified tokens (*ANY, *HIGHEST, or *LOWEST) are stored in the distribution repository when they are retrieved.
*RUN: Causes a program or procedure to be run at one or more managed systems.
*SND: Sends an object from the central site system to one or more managed systems or to another central site system.
*SNDINS: Sends an object from the central site system to one or more managed systems and installs the object at the managed system.
*SNDRUN: Sends an object from the central site system to one or more managed systems and runs the object at the managed system.
*UNINS: Removes (that is, uninstalls) a previously installed component from a managed system. The component may have originally been built from the installation of multiple objects, all of which are removed.

Global name (GLBNAME)

Specifies a global name, which is a series of tokens that uniquely identify an object in an SNA network. The global name represents the name that is used to locate the appropriate catalog entry on both the central site system and the managed systems. The catalog entry specifies the object that is to be used on that system. For example, if a retrieve action is specified, the global name is used to determine the object that is to be retrieved on the managed system. Also, the global name shows the location where it is to be stored on the central site system.

Special values in a token position indicate how to search for the object. By specifying *ANY in a token position, the token is ignored when searching for the correct object.

If an object is sent, the global name must have been previously cataloged so that it is associated with a local object name or associated with an object in the distribution repository. Retrieved objects, for which no catalog entry exists, are placed in the distribution repository.

Special values other than *SERVER, *TARGET, *MDDATE, and *MDTIME in a token position are allowed only for the following actions: *DLT, *RTV, *SND, *SNDRUN, or *SNDINS. The special values allowed for the first token are *NETID, *SERVER, *TARGET, *MDDATE, and *MDTIME.

Element 1: Token 1

The possible values are:

*NETID: The first global name token value is a network ID generated by the command from the network attributes. The network ID is determined by the current value of the LCLNETID network attribute value.
global-name-token-1: Specify the first token of the global name. The first token is recommended to be the registered enterprise ID or network ID.

Element 2-10: Token 2-10

The possible values are:

*ANY: Any token value matches when searching for the object where the action is to be performed.
*HIGHEST: The object with the highest token value has the action performed on it. The token must be ordered. This useful when a token in a global name is used to indicate a different version of the object and you need to manipulate the object with the highest version level.
*LOWEST: The object with the lowest token value has the action performed on it. The token must be ordered. This is useful when a token in global name is used to indicate a different version of the object and you need to manipulate the object with the lowest version level.
*NETID: The network ID of this system is used. The network ID is determined by the current value of the LCLNETID network attribute value.
*CPNAME: The control point name of this system is used. The control point name is determined by the current value of the LCLCPNAME network attribute value.
*SERVER:: This token is stored within the change request activity with the value &SERVER, and is replaced by the short name of the change control server when the object is distributed.
*TARGET:: This token is stored within the change request activity with the value &TARGET, and is replaced by the short name of the target when the object is distributed.
*MDDATE:: This token is stored within the change request activity with the value &DATE, and is replaced when distributed by the date the object was last modified.
*MDTIME:: This token is stored within the change request activity with the value &TIME, and is replaced when distributed by the time the object was last modified.
global-name-token-n: Specify one of a series of 1 to 16 character tokens that uniquely identify the object on which the action is to be performed. Characters A through Z and 0 through 9 can be used. Other special values (@, #, and $) can be used for tokens that represent network IDs and system names.
Note: GLBNAME is valid only when ACTION(*ACT) is not specified.

Component name (COMPNAME)

Component name, which is the set of global name tokens previous to the REF, FIX, or UPD subtree indicator (STI) tokens. The component name is used to identify the installable object that must be uninstalled from the managed system. The maximum number of tokens allowed is 7. The component name is used to identify the installable object that must be uninstalled from the managed system.

Note: COMPNAME is only valid when ACTION(*UNINS) is specified.

Element 1: Token 1

The only special value allowed for the first token is *NETID.

The possible values are:

*NETID: The network ID of this system is used. The network ID is determined by the current value of the LCLNETID network attribute value.
component-name-token-1: One of a series of 1 to 16 character tokens that uniquely identifies the object on which the action is to be performed. Characters A through Z and 0 through 9 can be used. Other special values (@, #, and $) can be used for tokens that represent network IDs and system names.
Elements 2-7: Tokens 2-7
*NETID: The network ID of this system is used. The network ID is determined by the current value of the LCLNETID network attribute value.
*CPNAME: The control point name of this system is used. The network ID is determined by the current value of the LCLCPNAME network attribute value.
component-name-token-n: One of a series of 1 to 16 character tokens that uniquely identifies the object on which the action is to be performed. Characters A through Z and 0 through 9 can be used. Other special values (@, #, and $) can be used for tokens that represent network IDs and system names.

Managed systems node list (NODL)

Specifies that the node list parameter is the object name that contains a list of systems that are the destinations for the activity. This parameter cannot be specified if the control point name (CPNAME) parameter is also specified.

The possible values are:

*NONE

The systems on which this activity is to be performed are not specified by a node list. Individual control point names must be specified.

The possible values are:

*LIBL: All of the libraries in the user and system portions of the job's library list are searched for the node list object.
*CURLIB: The current library for the job is used to locate the node list object.
library-name: Specify the name of the library to be searched.

node-list-name

Specify the node list object name containing the list of systems on which the activity is to be performed.

Managed system node names (CPNAME)

Specifies the APPN control point names of the managed systems on which this activity is to be performed. Control point names cannot be specified if the node list (NODL) parameter is specified. CPNAME is required unless NODL is specified.

The possible values are:

*NONE: The systems on which this activity is to be performed are not identified individually. A node list must be specified.
*NETATR: The network ID of the local system is used. This is useful when the node being specified is in the same network as the local system.
network-identifier: Specify the APPN network identifier of the managed system on which the activity is to be performed. For NetView Distribution Management Agents, the network identifier is the change control server name.
control-point-name: Specify the APPN control point name of the managed system on which the activity is to be performed. For NetView Distribution Management Agents, the control point name is the change control client which supports numeric characters (0-9) in the first position of control point names that are valid in other platforms.

Text 'description' (TEXT)

Specifies the activity description.

*GEN

A text description should be generated for the activity being added. The text description should be generated based the verb specified on the ACTION parameter. The text descriptions generated are:

Accept object
Restart the system
Delete object
Run object
Install object
Remove object
Retrieve object
Send object
Send and run object
Send and install object
Uninstall object

*BLANK

No text is specified.

text-description

Specify a 50-character textual description of the activity.

Activation force (ACTFRC)

Specifies whether or not the managed system should proceed with the activation based on its quiesced state.

activation force

Specify the activation force value.

*NO: The managed system will not proceed with the activation if the quiesce check shows that the managed system is still active.

delay units

Indicates the unit of time on which the delay period is specified.

*SECONDS: The delay period will be specified in seconds.
*MINUTES: The delay period will be specified in minutes.
*HOURS: The delay period will be specified in hours.

delay period

Specifies the maximum amount of time that the managed system may wait to quiesce (if not already quiesced) before taking the action specified:

3600: The delay period default is 3600 seconds.
1-65535: Delay period range.

*YES

The managed system will proceed with the activation even if the quiesce check shows that the managed system is still active. Delay units and delay period are ignored when activation force is *YES.

Note: ACTFRC is valid only when ACTION(*ACT) is specified.

Activation use on activate (ACTUSEACT)

Activation use on activate. Specifies which components altered by changes will be used during the activation.

*NONE: No activation use on activate is specified.
*BOTH: Both trial and production version.
*PROD: Production version only.
*LAST: Last used; either both trial and production or production only.

Note: ACTUSEACT is valid only when ACTION(*ACT) is specified.

Compression type (CPRTYPE)

Specifies the compression algorithm and related information associated with the compression of a particular change object. When one or both of the compression transfer state or compression storage state parameter specify *COMPRESS, this parameter must be present and one (and only one) of the adaptive compression, SNA compression, or user compression algorithms may be requested. This support is dependent on the implementation on the managed system.

*NONE: No compression type is specified.
*ADAPTIVE: Specifies whether or not adaptive compression pertains to the requested object. The iSeries system does not support *ADAPTIVE.
*SNA: Specifies whether or not SNA compression pertains to the requested object.
*USER: Specifies whether or not a named user compression pertains to the requested object.

Notes:

CPRTYPE is valid only when ACTION(*RTV), ACTION(*SND), ACTION(*SNDRUN), or ACTION(*SNDINS) is specified
CPRTYPE cannot be specified when CMPSTGSTT and CPRTFRSTT are not specified.
CPRTYPE cannot be specified when CMPSTGSTT is *DECOMPRESS and CPRTFRSTT is not specified.
CPRTYPE cannot be specified when CPRSTGSTT is not specified and CPRTFRSTT is *DECOMPRESS.
CPRTYPE cannot be specified when CPRSTGSTT and CPRTFRSTT are *DECOMPRESS.

SNA compression character (SNACPRCHR)

Specifies information about the SNA compression algorithm as it pertains to the requested object. If omitted, the implication is that SNA compression does not pertain to the requested object.

*BLANK: When SNA compression is requested, it is optionally specified with the implied default being the (X'40') character. Otherwise, it is not specified.
SNA-prime-character: The prime compression character to be associated with the single control byte (SCB) used by the SNA compression algorithm. Valid values are '00'X - 'FF'X
Note: SNACPRCHR is valid only when ACTION(*RTV), ACTION(*SND), ACTION(*SNDRUN) or ACTION(*SNDINS) is specified.

User compression information (USRCPRINF)

Specifies information about a named user compression algorithm as it pertains to the requested object. If omitted, the implication is that user compression does not pertain to the requested object.

user-compression-name: The name of the user compression algorithm that pertains to the requested object. It should be specified when user compression is requested. Otherwise, it is not specified.
user-parameters: User parameters that apply to the user compression algorithm named in the user compression name. It is optionally specified when user compression is requested. Otherwise, it is not specified.
Note: USRCPRINF is valid only when ACTION(*RTV), ACTION(*SND), ACTION(*SNDRUN) or ACTION(*SNDINS) is specified.

Compression storage state (CPRSTGSTT)

Specifies whether or not the object should be stored in compressed format at the managed system once the object is sent.

*NONE: No compression storage state is specified.
*DECOMPRESS: Store the object in a decompressed format at the managed system. If the object is already decompressed when it arrives to the managed system, store it as received. Otherwise, decompress the object using the compression method used to catalog the object in the managed system before storing it.
*COMPRESS: Store the object in a compressed format at the managed system. When this value is specified, the compression algorithm must also be specified. If the object is already compressed when it arrives at the managed system, store the object as received. Otherwise, compress the object using the compression algorithm before storing it.

Note: CPRSTGSTT is valid only when ACTION(*RTV), ACTION(*SND), ACTION(*SNDRUN) or ACTION(*SNDINS) is specified.

Compression transfer state (CPRTFRSTT)

Specifies whether or not the object should be transferred to the managed system in compressed format.

*NONE: No compression transfer state is specified.
*DECOMPRESS: Transfer the object in decompressed format to the managed system. If already decompressed at the source, transfer the object as stored. Otherwise decompress the object using the compression method used to catalog the object in the managed system before sending it.
*COMPRESS: Compress the object using the compression algorithm and transfer the object in compressed format to the managed system. When this value is specified, the compression algorithm must also be specified. If the object is already compressed using a different algorithm at the source, decompress the object using the compression method used to catalog the object in the managed system before compressing and transferring it.

Note: CPRTFRSTT is valid only when ACTION(*RTV), ACTION(*SND), ACTION(*SNDRUN) or ACTION(*SNDINS) is specified.

Activation use on install (ACTUSEINS)

Specifies whether the component to be altered by the installation process will be trial version or production version. If activation use on install is *TRIAL, it means the object should be installed in the trial area to be tested. Removability must then be *YES.

*PROD: Production version only.
*TRIAL: Trial version only.

Note: ACTUSEINS is valid only when ACTION(*INS) or ACTION(*SNDINS) is specified.

Alter active components (ALTACTCOMP)

Specifies whether or not the managed system is allowed to apply the component alterations to the active system. If alterations cannot be applied, then such action is to be deferred until the next activation. This parameter is only allowed for *SNDINS action.

*NONE: No alter active component is specified.
*ALLOWED: Managed system is allowed to apply the component alterations to the active system.
*NOTALLOWED: Managed system is not allowed to apply the component alterations to the active system.

Note: ALTACTCOMP is valid only when ACTION(*INS), ACTION(*SNDINS), ACTION(*RMV), or ACTION(*UNINS) is specified.

Auto accept (AUTOACP)

Specifies whether the managed system accepts objects automatically if installation and any tests performed are successful, in order to release resources required to maintain removability as soon as possible. Like a separate accept request, the managed system deletes the objects after successful automatic acceptance.

*NONE

No auto accept is specified.

*NO

Do not perform automatic acceptance.

auto accept

Auto acceptance possible values:

*YES: Perform automatic acceptance.
*DESIRED: Perform automatic acceptance, if the specified managed system supports it.

The possible values are:

delay

Specifies the number of days the entry point is expected to wait before accepting the object automatically.

delay-days: Valid range of days is 0-255.

Note: AUTOACP is valid only when ACTION(*INS) or ACTION(*SNDINS) is specified.

Auto remove (AUTORMV)

Specifies whether or not the managed system removes the object automatically if failure by either installation or a test.

*NONE: No auto remove is specified.
*DESIRED: Perform automatic removal if the specified managed system supports it.
*YES: Perform automatic removal.
*NO: Do not perform automatic removal.

Note: AUTORMV is valid only when ACTION(*INS) or ACTION(*SNDINS) is specified.

Pre test (PRETEST)

Specifies whether or not the entry point is to perform a test on the objects prior to installing them.

*DESIRED: Perform a pretest if the specified managed system supports it.
*YES: Perform a pretest.
*NO: Do not perform a pretest.

Note: PRETEST is valid only when ACTION(*INS) or ACTION(*SNDINS) is specified.

Post test (POSTTEST)

Specifies whether or not the entry point is to perform a test on the objects after installing or removing them.

*DESIRED: Perform a posttest if the specified managed system supports it.
*YES: Perform a posttest.
*NO: Do not perform a posttest.

Note: POSTTEST is valid only when ACTION(*INS), ACTION(*SNDINS) or ACTION(*RMV) is specified.

Allow remove (ALWRMV)

Specifies whether or not objects are to be installed in a removable manner (so that a subsequent remove action can be issued against the objects).

*YES: Install the object in a removable manner.
*DESIRED: Install the object in a removable manner if the specified managed system supports it.
*NO: Do not install the object in a removable manner.

Note: ALWRMV is valid only when ACTION(*INS) or ACTION(*SNDINS) is specified.

Initiate parameters (PARM)

Specifies the parameters to be passed to the program to be run.

parameter data: Specifies the parameters to be passed when starting the program. Each parameter is a 1 to 253 character. The initial display allows 25 characters to be typed. By typing an & in position 1, the field expands to accommodate longer parameters. If the parameters include blanks or special characters, enclose them in apostrophes.

Note: PARM is valid only when ACTION(*RUN) or ACTION(*SNDRUN) is specified.

Keep object (KEEPOBJ)

Specifies whether or not the object should be kept or deleted after the function has been successfully performed.

*NONE: No keep object is specified.
*YES: The object should be kept after performing the function.
*NO: The object should be deleted after performing the function.

Note: KEEPOBJ is valid only when ACTION(*RUN), ACTION(*INS), ACTION(*SNDRUN) or ACTION(*SNDINS) is specified.

Corequisite change name list (COREQCHGNL)

Specifies a list of SNA/file services (SNA/FS) global names identifying the names of objects that are to be installed by the entry point as a part of the installation of the object to be retrieved. A maximum of six corequisite change names are allowed. The global name is a unique name you assign to the object so that it is not confused with any other object in a network. The global name represents the name that will be used to locate the appropriate catalog entry on both the central site and managed systems.

*NONE: No corequisite change name list is specified.
global-name-token: One of a series of 1-16 character tokens that uniquely identify the object on which the action is to be performed. Characters A through Z and 0 through 9 may be used. Other special values (@, #, and $) may be used for tokens that represent network IDs and system names.

Note: COREQCHGNL is valid only when ACTION(*INS) or ACTION(*SNDINS) is specified.

Replace object (REPLACE)

Specifies whether the object should be replaced if it already exists.

*NO: The object must be added.
*YES: The object must be replaced.
*ALLOWED: The object should be replaced or added.

Note: REPLACE is valid only when ACTION(*RTV), ACTION(*SND), ACTION(*SNDRUN) or ACTION(*SNDINS) is specified.

To be deleted name (TODLTNAME)

Specifies the name of the object, at the managed system location, that is to be deleted.

Special values in a token position indicate how to search for the object. By specifying *ANY in a token position, the token is ignored when searching for the correct object.

*NONE: No to be deleted name is specified.

The special values allowed for the first token are: *NETID, *SERVER, *TARGET, *MDDATE, and *MDTIME.

Element 1: Token 1

The possible values are:

*NETID

The first global name token value is a network ID generated by the command from the network attributes. The network ID is determined by the current value of the LCLNETID network attribute value.

*SERVER:

This token is stored within the change request activity with the value &SERVER, and is replaced by the short name of the change control server when the object is deleted.

*TARGET:

This token is stored within the change request activity with the value &TARGET, and is replaced by the short name of the target when the object is deleted.

*MDDATE:

This token is stored within the change request activity with the value &DATE, and is replaced by the date the object was last modified.

*MDTIME:

This token is stored within the change request activity with the value &TIME, and is replaced by the time the object was last modified.

global-name-token-1

Specify the first token of the global name. The first token is recommended to be the registered enterprise ID or network ID.

Element 2-10: Token 2-10

*ANY

Any token value matches when searching for the object where the action is to be performed.

*HIGHEST

The object with the highest token value has the action performed on it. The token must be ordered. This is useful when a token in a global name is used to indicate a different version of the object and you need to manipulate the object with the highest version level.

*LOWEST

The object with the lowest token value has the action performed on it. The token must be ordered. This is useful when a token in a global name is used to indicate a different version of the object and you need to manipulate the object with the lowest version level.

*NETID

The network ID of this system is used. The network ID is determined by the current value of the LCLNETID network attribute value.

*CPNAME

The control point name of this system is used. The control point name is determined by the current value of the LCLCPNAME network attribute value.

*SERVER:

This token is stored within the change request activity with the value &SERVER, and is replaced by the short name of the change control server when the object is deleted.

*TARGET:

This token is stored within the change request activity with the value &TARGET, and is replaced by the short name of the target when the object is deleted.

*MDDATE:

This token is stored within the change request activity with the value &DATE, and is replaced when distributed by the date the object was last deleted.

*MDTIME:

This token is stored within the change request activity with the value &TIME, and is replaced when distributed by the time the object was last deleted.

global-name-token-n

Specify one of a series of 1 to 16 character tokens that uniquely identify the object on which the action is to be performed. Characters A through Z and 0 through 9 can be used. Other special values (@, #, and $) can be used for tokens that represent network IDs and system names.

Notes:

TODLTNAME is valid only when ACTION(*SND), ACTION(*SNDRUN) or ACTION(*SNDINS) is specified.
The number of tokens specified in the TODLTNAME parameter must match the number of tokens specified in the GLBNAME parameter.
TODLTNAME cannot be specified if the REPLACE value is *NO.

Refresh level (REFLVL)

Specifies the level of the software component to be uninstalled.

*NONE: No refresh level is specified.
refresh level: Specify a numeric character string of up to 16 digits.

Note: REFLVL is valid only when ACTION(*UNINS) is specified.

Force uninstall (FRCUNINS)

Specifies whether to perform the uninstallation even if the software component includes an object that is waiting to be installed or an object that is currently being installed.

*NO: Do not allow uninstallation if there are objects, for the software component, waiting to be installed.
*YES: Allow uninstallation even if there are objects, for the software component, waiting to be installed.

Note: FRCUNINS is valid only when ACTION(*UNINS) is specified.

Start time on managed system (RMTSTRTIME)

Specifies the date and time when the activity can begin running on the managed system. The current date and time values and next date values are determined when the activity begins running at the central site system based on the central site date and time.

Single value:

*NONE: No start time on the managed system is specified.

Element 1: Time Zone

The time zone of the remote start time.

The possible values are:

*LCLSYS

The remote start time is specified in the time zone of the central site system. The start time is converted to Greenwich Mean Time.

*MGDSYS

The remote start time is specified in the time zone of the managed system.

Element 2: Start After Time

This is the definition of the time after which the activity is to start.

*CURRENT

This function can start on the managed system at any time on or after the time this activity is started on the central site system on the date specified in element 2.

start-after-time

Specify the time when this function can start on the managed system. The time can be entered as 4 or 6 digits (hhmm or hhmmss) where hh = hours, mm = minutes, and ss = seconds. Seconds are optional. The time can be specified with or without a time separator. With a time separator, specify a string of 5 or 8 digits (hh:mm or hh:mm:ss).

Element 3: Start After Date

*CURRENT

This function starts on the managed system on any date on or after the activity starts on the central site system.

*NEXT

This function starts on the managed system on any date after the activity starts on the central site system.

start-after-date

Specify the date after the functions start on the managed system. The date must be specified in the job date format.

Notes:

The special values *CURRENT and *NEXT cannot be specified for the date and the time when the time zone value *MGDSYS is specified.
This parameter is valid only when these actions are specified: *ACP, *ACT, *RUN, *INS, *RMV, *SNDRUN, *SNDINS, or *UNINS.

Activity conditions (COND)

Specifies which conditions must be met before this activity can be performed. Each condition identifies an activity that must run before this activity and the value the end code from that activity must have to allow this activity to run. The default condition is that the previous activity (in alphabetical order) must complete successfully before this activity can be run.

Element 1: Conditioning Activity

The activity that must be run before this activity.

The possible values are:

*PRV

This activity is conditioned on the previous activity. Activities are ordered alphabetically by activity name. If the activity being added is the first activity, a previous activity does not exist and any condition with *PRV is marked as having been met.

conditioning-activity-name

Specify the name of the activity that must be run before this activity. The activity name specified in the activity (ACTIVITY) parameter cannot be specified in the conditioning activity name. An activity cannot be conditioned on itself.

generic*-conditioning-activity-name

Specify the generic name of the activities that must be run before this activity.

Element 2: Relational Operator

This element is the relational operator to use when comparing the end code from the conditioning activity.

*EQ

Equal

*GT

Greater than

*LT

Less than

*NE

Not equal

*GE

Greater than or equal

*LE

Less than or equal

Element 3: Condition Code

This element is the value compared to the actual end code of the conditioning activity.

*SUCCESS

The activity ended successfully (0 <= end code <= 9). This end code can only be specified with relational operator *EQ or *NE.

*FAIL

The activity failed (10 <= end code <= 89). This end code can only be specified with relational operator *EQ or *NE.

*NOTRUN

The activity never started (90 <= end code <= 99). This end code is only specified with relational operator *EQ or *NE.

*ANY

The activity ended with any end code. This end code is only specified with relational operator *EQ.

end-code

Specify an integer value (0-99) that indicates the result of an activity (success or failure). The end code ranges and descriptions are:

00

Activity completed successfully.

01-09

Activity completed with warning messages.

10-29

Activity did not complete successfully.

30-39

Activity was canceled by a user before it completed.

30 = Activity ended with *CNTRLD option
35 = Activity ended with *IMMED option
39 = Activity ended with *FRCFAIL option

40-49

Activity was not run due errors detected by the application.

40 = Activity not run for security reasons

90-99

Activity was not run because conditions or schedules were not met.

95 = Scheduled start time expired
99 = Conditions cannot be met

Element 4: Condition Mode

This element indicates which systems the conditioning activity must have completed on before this activity can be performed.

*ALLNODES: The conditioning activity specified must complete on all nodes before this activity runs.
*SAMENODE: When the conditioning activity specified completes for a given node, the activity specified on the ACTIVITY parameter may run for that same node even though the conditioning activity specified cannot have completed for all other nodes. In the case where this activity lists a node not in the conditioning activity, this activity may run for that node; the condition is ignored.

*NONE

There are no conditions for this activity.

Activity start time (STRTIME)

Specifies the date and time when this activity can be started on the central site system. The current date and time values, and next date values are determined when the change request is submitted.

Element 1: Start After Time

The possible values are:

*CURRENT

This activity can start any time on or after the time when the change request is submitted.

start-after-time

Specify the time when this activity can start. The time can be entered as 4 or 6 digits (hhmm or hhmmss) where hh = hours, mm = minutes, and ss = seconds. Seconds are optional. The time can be specified with or without a time separator such as a colon (:). With a time separator, specify a string of 5 or 8 digits (hh:mm or hh:mm:ss).

Element 2: Start After Date

*CURRENT

This activity can start on or after the date on which the change request is submitted.

*NEXT

The activity can start on any date after the date when the change request is submitted.

start-after-date

Specify the date after which this activity can start. The date must be specified in the job date format.

Element 3: Start Before Time

This element is ignored if the start before date is *ANY.

*ANY

The activity can start at any time on or before the start before date.

*CURRENT

The activity must start before the time when the change request was submitted on the date specified on the start before data element.

start-before-time

Specify the time before the activity must be started. If the activity cannot be started before this time, it never starts. The time can be entered as 4 or 6 digits (hhmm or hhmmss) where hh = hours, mm = minutes, and ss = seconds. Seconds are optional. The time can be specified with or without a time separator such as a colon (:). With a time separator, specify a string of 5 or 8 digits (hh:mm or hh:mm:ss).

Element 4: Start Before Date

*ANY

The activity can start at any time after the start after time and the start after date.

*CURRENT

The activity must start on the date the change request is submitted.

*NEXT

The activity must start by the day after the date the change request is submitted.

start-before-date

Specify the date before the activity must start. If the activity cannot be started by this date, it never starts. The date must be specified in the job date format.

Hold activity (HOLD)

Hold the activity when the change request is submitted.

*NO: The activity is not held and will run when all conditions are met.
*YES: The activity is held for all nodes when the change request is submitted. It must be released by you before it runs.

Examples

The following examples illustrate how to use the ADDCRQA command to schedule activities to be performed on managed systems controlled by a NetView Distribution Manager/6000 change control server. The examples shown here are grouped according to their activity action:

Accept
Activate
Delete
Run
Install
Remove
Retrieve
Send, send and run, send and install
Uninstall

Example 1: Accept Actions

The examples shown here match those shown for the install examples and demonstrate how some of the installed objects can be accepted.

The install activity added to the change request description is:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT01)
          ACTION(*INS)
          GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*TRIAL)  ALWRMV(*YES)
```
When the change request is submitted and if the activity is run successfully, object IBM 1234567 PMGRAB UPD 1 2 is installed (to be tested) in the trial area of managed system MARYPWS1. MARYPWS1 is controlled by the change control server ROMSERV1. Because the object is installed in the trial area, the object cannot be accepted.
The install activity added to the change request description is:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT02)
          ACTION(*INS)
          GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*PROD)  ALTACTCOMP(*ALLOWED)
          ALWRMV(*NO)
          RMTSTRTIME((*MGDSYS) (8:30:00 12/25/02))
```
When the change request is submitted and if the activity is successfully run, object IBM 1234567 PMGRAB UPD 1 2 is installed in the active area of the system MARYPWS1. MARYPWS1 is managed by the change control server ROMSERV1. The object is installed in a nonremovable manner, and thus, the object does not need to be accepted.

The install activity added to the change request description is:

ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT03)
          ACTION(*INS)
          GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          COREQCHGNL((REXX PROC UPDATE CONFIG))
          ACTUSEINS(*PROD)
          ALTACTCOMP(*NOTALLOWED)  AUTOACP((*YES))
          ALWRMV(*YES)

The objects are automatically accepted with a required activation if the following conditions are met:

The change request is submitted
The activity runs successfully
The installation completes successfully (the object IBM 1234567 PMGRAB UPD 1 2 and its corequisite REXX PROC UPDATE CONFIG were installed successfully)

If the installation did not complete successfully, the objects IBM 1234567 PMGRAB UPD 1 2 and REXX PROC UPDATE CONFIG are not automatically accepted. You can accept the objects running the following activities:

ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(ACCACT01)
          ACTION(*ACP)
          GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          COND((INSACT03 *EQ 20 *SAMENODE))
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(ACCACT02)
          ACTION(*ACP)
          GLBNAME(REXX PROC UPDATE CONFIG)
          CPNAME((ROMSERV1 MARYPWS1))
          COND((INSACT03 *EQ 20 *SAMENODE))

The install activity added to the change request description is:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT04)
          ACTION(*INS)
          GLBNAME(EURO WORDPROD UPD 2 3 US)
          CPNAME((EUROITAL FREDSWS))
          ALWRMV(*YES)
```
When the change request is submitted and if the activity is run successfully, an object is installed in a removable manner. The object can be accepted adding an activity to accept the previously installed object EURO WORDPROD UPD 2 3 US on managed system FREDSWS. Managed system FREDSWS is controlled by the change control server EUROITAL.
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(ACCACT03)
          ACTION(*ACP)  GLBNAME(EURO WORDPROD UPD 2 3 US)
          CPNAME((EUROITAL FREDSWS))
          COND((INSACT04 *EQ *SUCCESS *SAMENODE))
```

Example 2: Activate Actions

It is assumed that an install activity was issued as follows:

ADDCRQA   CRQD(CCLIB/CRQINSACT)  ACTIVITY(INSACT01)
          ACTION(*INS)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*PROD)  ALTACTCOMP(*NOTALLOWED)
          AUTOACP(*YES)
          COREQCHGNL((REXX PROC UPDATE CONFIG))

When the change request is submitted and if the activity is run successfully, objects IBM 1234567 PMGRAB UPD 1 2 and REXX PROC UPDATE CONFIG are automatically accepted. To apply the component alterations to the active system, an activation is required. To activate previously installed changes, run an activity like the following:
```
ADDCRQA   CRQD(CCLIB/CRQINSACT)  ACTIVITY(ACTACT01)
          ACTION(*ACT)  CPNAME((ROMSERV1 MARYPWS1))
          ACTFRC(*NO *HOURS 6)  ACTUSEACT(*PROD)
          STRTIME((2:00:00 *NEXT) (8:00:00 *NEXT))
```
The activation will occur after 2 a.m. but before 8 a.m. the next morning the request is submitted. The MARYPWS1 system waits up to six hours before proceeding with the activation if the managed system is still active.
Add an activity to schedule the activation of all previously installed objects on managed system FREDSWS. FREDSWS is controlled by the change control server EUROITAL. The activation occurs as soon as possible after 11 p.m. on 15 April 2002 in the time zone where FREDSWS is located. The activation occurs even if the managed system FREDSWS is still active.
```
ADDCRQA   CRQD(CCLIB/CRQINSACT)  ACTIVITY(ACTACT02)
          ACTION(*ACT)  CPNAME((EUROITAL FREDSWS))
          ACTFRC(*YES)
          RMTSTRTIME(*MGDSYS (23:00:00 04/15/02))
```

Example 3: Delete Actions

Add an activity to delete the object EURO WORDPROD UPD 2 3 US on managed system FREDSWS. FREDSWS is controlled by the change control server EUROITAL.

ADDCRQA   CRQD(CCLIB/CRQDLT)  ACTIVITY(DLTACT01)
          ACTION(*DLT)
          GLBNAME(EURO WORDPROD UPD 2 3 US)
          CPNAME((EUROITAL FREDSWS))

Add an activity to delete all test files from systems MARYPWS1, MARYPWS2, MARYPWS3, and MARYPWS4. These systems are controlled by the change control server ROMSERV1. The test files on these systems are cataloged as EURO SPELLCHECK TEST file-name.

ADDCRQA   CRQD(CCLIB/CRQSNDDLT)  ACTIVITY(DLTACT01)
          ACTION(*DLT)  GLBNAME(EURO SPELLCHECK TEST *ANY)
          CPNAME((ROMSERV1 MARYPWS1) (ROMSERV1 MARYPWS2)
                 (ROMSERV1 MARYPWS3) (ROMSERV1 MARYPWS4))
          COND((SNDACT01 *EQ *SUCCESS *ALLNODES))

The delete activity is performed only if the object EURO SPELLCHECK EXE 1 US is successfully sent to those systems:

ADDCRQA   CRQD(CCLIB/CRQSNDDLT)  ACTIVITY(SNDACT01)
          ACTION(*SND)  GLBNAME(EURO SPELLCHECK EXE 1 US)
          CPNAME((ROMSERV1 MARYPWS1) (ROMSERV1 MARYPWS2)
                 (ROMSERV1 MARYPWS3) (ROMSERV1 MARYPWS4))
          REPLACE(*ALLOWED)

Example 4: Run Actions

Add an activity to run the program or script known by the global name EURO VIRUSCHK EXE 1 US on managed system FREDSWS. Pass the parameter /usr/bin to the program or script. The activity is run as soon as possible.
```
ADDCRQA   CRQD(CCLIB/CRQRUN)  ACTIVITY(RUNACT01)
          ACTION(*RUN)
          GLBNAME(EURO VIRUSCHK EXE 1 US)
          CPNAME((EUROITAL FREDSWS))  PARM(("/usr/bin"))
```
Add an activity to run the program known by the global name EURO WORDPROC EXE 2 US on managed system JOHNSWS. This activity should be run immediately by the PS/2. The object should be kept in the NetView/DM2 catalog. The change control server is in the same network as the local system.
```
ADDCRQA   CRQD(CCLIB/CRQRUN)  ACTIVITY(RUNACT02)
          ACTION(*RUN)
          GLBNAME(EURO WORDPROC EXE 2 US)
          CPNAME((*NETATR JOHNSWS))  KEEPOBJ(*YES)
```

Example 5: Install Actions

The first four examples shown here match those shown for the accept and remove examples.

Add an activity to install the object identified by the global name IBM 1234567 PMGRAB UPD 1 2 on the change control client machine (managed system) called MARYPWS1. MARYPWS1 is controlled by the change control server ROMSERV1. The object is to be installed in the trial area.
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT01)
          ACTION(*INS)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*TRIAL)  ALWRMV(*YES)
```
Add an activity to install the object identified by the global name IBM 1234567 PMGRAB UPD 1 2 on the change control client machine (managed system) called MARYPWS1. MARYPWS1 is controlled by the change control server ROMSERV1. The object is to be installed permanently in the active area. The activity is to be processed at 8:30 a.m. on 25 December 2002.
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT02)
          ACTION(*INS)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*PROD)  ALTACTCOMP(*ALLOWED)
          ALWRMV(*NO)
          RMTSTRTIME((*MGDSYS) (8:30:00 12/25/02))
```
Add an activity to install the objects identified by the global names IBM 1234567 PMGRAB UPD 1 2 and its corequisite REXX PROC UPDATE CONFIG on the change control client (managed system) MARYPWS1. MARYPWS1 is controlled by the change control server ROMSERV1. The objects are to be installed in a nonremovable manner and are to be automatically accepted. An activation is required to apply the component alterations to the active system. The activity is to be processed immediately. If the installation of one of the objects fails, the other installation fails also.
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT03)
          ACTION(*INS)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*PROD)  ALTACTCOMP(*NOTALLOWED)
          AUTOACP((*YES))  ALWRMV(*YES)
          COREQCHGNL((REXX PROC UPDATE CONFIG))
```
Add an activity to install the object identified by the global name EURO WORDPROD UPD 2 3 US on the change control client machine (managed system) called FREDSWS. FREDSWS is controlled by the change control server EUROITAL. The object is to be installed in a removable manner.
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT04)
          ACTION(*INS)  GLBNAME(EURO WORDPROD UPD 2 3 US)
          CPNAME((EUROITAL FREDSWS))
          ALWRMV(*YES)
```

Add an activity to schedule the install of the objects EURO.WORDPROC.REF.2.US and EURO.WORDPROC.UPD.2.3.US on managed system FREDSWS. FREDSWS is controlled by the change control server EUROITAL. The object is installed in the active area in a removable manner. The installation is not automatically accepted. The installation is scheduled for 3 p.m. on 1 January 2003.

ADDCRQA   CRQD(CCLIB/CRQRTVINS)  ACTIVITY(INSACT05)
          ACTION(*INS)  GLBNAME(EURO WORDPROC REF 2 US)
          CPNAME((EUROITAL FREDSWS))
          ALTACTCOMP(*ALLOWED)
          COREQCHGNL(EURO WORDPROC UPD 2 3 US)
          RMTSTRTIME(*MGDSYS (15:00:00 1/01/03))
          COND((RTVACT01 *EQ *SUCCESS *ALLNODES))

The activity can be performed only if the object EURO WORDPROC UPD 2 3 US is successfully retrieved from the change control client BRIGSWS.

ADDCRQA   CRQD(CCLIB/CR7)  ACTIVITY(RTVACT01)  ACTION(*RTV)
          GLBNAME(EURO WORDPROC UPD 2 3 US)
          CPNAME((EUROITAL BRIGSWS))
          STRTIME((22:00:00 12/31/02) (06:00:00 1/01/03))

Add an activity to install the object identified by the global name IBM 1234567 WINDMB UPD 1 2 on the production area of managed system MARYPWS1. If the installation fails, the object is removed automatically.
```
ADDCRQA   CRQD(CCLIB/CRQINS)  ACTIVITY(INSACT06)
          ACTION(*INS)  GLBNAME(IBM 1234567 WINDMB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*PROD)  AUTORMV(*YES)  ALWRMV(*YES)
```

Example 6: Remove Actions

The examples shown here match those shown for the install examples and demonstrate how the installed objects can be removed.

The install activity added to the change request description is:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT01)
          ACTION(*INS)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*TRIAL)  ALWRMV(*YES)
```
When the change request is submitted and if the activity is run successfully, object IBM 1234567 PMGRAB UPD 1 2 is installed (to be tested) in the trial area of managed system MARYPWS1. MARYPWS1 is controlled by the change control server ROMSERV1. The object IBM 1234567 PMGRAB UPD 1 2 can be removed when you run the following activity:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(RMVACT01)
          ACTION(*RMV)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))  POSTST(*NO)
```
A posttest is not required.
The install activity added to the change request description is:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT02)
          ACTION(*INS)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*PROD)  ALTACTCOMP(*ALLOWED)
          ALWRMV(*NO)
          RMTSTRTIME((*MGDSYS) (8:30:00 12/25/02))
```
When the change request is submitted and if the activity is run successfully, object IBM 1234567 PMGRAB UPD 1 2 is installed in the active area of the system MARYPWS1. MARYPWS1 is managed by the change control server ROMSERV1. The object is installed in a nonremovable manner.

The install activity added to the change request description is:

ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT03)
          ACTION(*INS)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          ACTUSEINS(*PROD)  ALTACTCOMP(*NOTALLOWED)
          AUTOACP((*YES))  ALWRMV(*YES)
          COREQCHGNL((REXX PROC UPDATE CONFIG))

The objects are automatically accepted if the following conditions are met:
- The change request is submitted
- The activity is run
- The installation completes successfully (the object IBM 1234567 PMGRAB UPD 1 2 and its corequisite REXX PROC UPDATE CONFIG were installed successfully)
All objects are installed in a removable manner, but an activation is required. The objects can be removed by adding and running activities like the following:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(RMVACT02)
          ACTION(*RMV)  GLBNAME(IBM 1234567 PMGRAB UPD 1 2)
          CPNAME((ROMSERV1 MARYPWS1))
          COND((INSACT03 *EQ *SUCCESS *SAMENODE))
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(RMVACT03)
          ACTION(*RMV)  GLBNAME(REXX PROC UPDATE CONFIG)
          CPNAME((ROMSERV1 MARYPWS1))
          COND((INSACT03 *EQ *SUCCESS *SAMENODE))
```
The install activity added to the change request description is:
```
ADDCRQA   CRQD(CCLIB/CRQACPRMV)  ACTIVITY(INSACT04)
          ACTION(*INS)  GLBNAME(EURO WORDPROD UPD 2 3 US)
          CPNAME((EUROITAL FREDSWS))  ALWRMV(*YES)
```
When the change request is submitted and if the activity is run successfully, the object is installed in a removable manner. The object can be removed when you add an activity to remove the previously installed object EURO WORDPROD UPD 2 3 US on managed system FREDSWS. FREDSWS is controlled by the change control server EUROITAL.
```
ADDCRQA   CRQD(CCLIB/CRQINSRMV)  ACTIVITY(RMVACT04)
          ACTION(*RMV)  GLBNAME(EURO WORDPROD UPD 2 3 US)
          CPNAME((EUROITAL FREDSWS))
          COND((INSACT04 *EQ *SUCCESS *SAMENODE))
```

Example 7: Retrieve Actions

Add an activity that causes the file EURO WORDPROC UPD 2 3 US to be retrieved from the managed system JOHNSWS. The file is transferred in a compressed format and then stored in a decompressed format. The SNA compression type is used.

ADDCRQA   CRQD(CCLIB/CRQRTV)  ACTIVITY(RTVACT01)
          ACTION(*RTV)  GLBNAME(EURO WORDPROC UPD 2 3 US)
          CPNAME((EUROITAL JOHNSWS))  CPRTYPE(*SNA)
          CPRSTGSTT(*DECOMPRESS)  CPRTFRSTT(*COMPRESS)
          REPLACE(*ALLOWED)

Add an activity that causes the object EURO PCSOFT UPD 2 3 US to be retrieved from the managed system JOHNSWS. The file is transferred and stored in a compressed format. The user compression name NVDMLZW is used. This user compression type is supported if the object is not decompressed at the central site system.
```
ADDCRQA   CRQD(CCLIB/CRQRTV)  ACTIVITY(RTVACT02)
          ACTION(*RTV)  GLBNAME(EURO PCSOFT UPD 2 3 US)
          CPNAME((EUROITAL JOHNSWS))  CPRTYPE(*USER)
          CPRSTGSTT(*COMPRESS)  CPRTFRSTT(*COMPRESS)
          USRCPRINF(NVDMLZW 37 '/D')  REPLACE(*ALLOWED)
```
Add an activity to retrieve the most recent sales file from each system. The files are cataloged as EURO SALES system-name date-created. The file is sent and stored in a compressed format. The SNA compression algorithm is used. The file is retrieved after 10 p.m. on the day the request is submitted but before 6 a.m. the next morning when the stores open. All files retrieved are added to the distribution repository when they are retrieved.
```
ADDCRQA   CRQD(CCLIB/CRQRTV)  ACTIVITY(RTVACT03)
          ACTION(*RTV)  GLBNAME(EURO SALES *ANY *HIGHEST)
          NODL(STORES)  CPRTYPE(*SNA)  CPRSTGSTT(*COMPRESS)
          CPRTFRSTT(*COMPRESS)  REPLACE(*NO)
          STRTIME((22:00:00 *CURRENT) (06:00:00 *NEXT))
```

Example 8: Send, Send and Run, and Send and Install Actions

Add an activity to send the file EURO SPELLCHECK EXE 1 US to the managed system FREDSWS. FREDSWS is controlled by the change control server EUROITAL. The file is not compressed. The file is replaced or added at the managed system.
```
ADDCRQA   CRQD(CCLIB/CRQSND)  ACTIVITY(SNDCT01)
          ACTION(*SND)  GLBNAME(EURO SPELLCHECK EXE 1 US)
          CPNAME((EUROITAL FREDSWS))  REPLACE(*ALLOWED)
```
Add an activity to send and install the two objects EURO WORDPROC REF 2 US and EURO WORDPROC UPD 2 3 US on managed system FREDSWS with these specified attributes. The installation is done to the active area in a removable manner. The installation is not automatically accepted. It is scheduled for 3 a.m. on 13 April 2002 in the time zone where the managed system is located.
```
ADDCRQA   CRQD(CCLIB/CRQSND)  ACTIVITY(SNDCT02)
          ACTION(*SNDINS)  GLBNAME(EURO WORDPROC REF 2 US)
          CPNAME((EUROITAL FREDSWS))  ALTACTCOMP(*ALLOWED)
          COREQCHGNL((EURO WORDPROC UPD 2 3 US))
          RMTSTRTIME(*MGDSYS (15:00:00 04/13/02))
```
Add an activity to send and run the program known by the global name EURO.VIRUSCHK.EXE.1.US on managed system FREDSWS. Pass the parameter /usr/bin to the program. The program is run as soon as possible.
```
ADDCRQA   CRQD(CCLIB/CRQSND)  ACTIVITY(SNDCT03)
          ACTION(*SNDRUN)  GLBNAME(EURO VIRUSCHK EXE 1 US)
          CPNAME((EUROITAL FREDSWS))  PARM(("/usr/bin"))
```
Add activities to retrieve the program identified by the global name CUSTNET PCSOFT WDWAPP VER3 941128 from the PS/2 DEVPS2, which is controlled by the central site CUSTNET. Send and run on all of the PS/2s in the southeast area. The central site system runs the program at 11 p.m. in the time zone where the PS/2 is located only if the retrieve from the PS/2 DEVPS2 was successful. The activity names are generated.
```
ADDCRQA   CRQD(CCLIB/CRQRTVSND)  ACTIVITY(*GEN)
          ACTION(*RTV)
          GLBNAME(CUSTNET PCSOFT WDWAPP VER5 021230)
          CPNAME((CUSTNET DEVPS2))
```
```
ADDCRQA   CRQD(CCLIB/CRQRTVSND)  ACTIVITY(*GEN)
          ACTION(*SNDRUN)
          GLBNAME(CUSTNET PCSOFT WDWAPP VER5 021230)
          NODL(PS2SE)
          RMTSTRTIME(*MGDSYS (23:00:00 12/30/02))
          COND((*PRV *EQ *SUCCES *SAMENODE))
```

Example 9: Uninstall Actions

Add an activity to uninstall the component EURO WORDPROC from managed system FREDSWS at the time and date specified. The system must be in a state of inactivity at that time. Do not perform the uninstall action if there are objects waiting to be installed.

ADDCRQA   CRQD(CCLIB/CRQUNINS)  ACTIVITY(UNSACT01)
          ACTION(*UNINS)  COMPNAME(EURO WORDPROD)
          CPNAME((EUROITAL FREDSWS))
          ALTACTCOMP(*NOTALLOWED)  FRCUNINS(*NO)
          REFLVL("2")
          RMTSTRTIME(*MGDSYS (14:00:00 05/20/02))