| 1 | Receiver variable | Output | Char(*) |
| 2 | Length of receiver variable | Input | Binary(4) |
| 3 | Format name | Input | Char(8) |
| 4 | Qualified subsystem name | Input | Char(*) |
| 5 | Error code | I/O | Char(*) |
| 6 | Number of qualified subsystem libraries | Input | Binary(4) |
The Retrieve Subsystem Information (QWDRSBSD) API retrieves information about one or more specific subsystems or all active subsystems.
The subsystem description authority and library authority are not required when *ACTIVE is specified for the qualified subsystem name parameter.
The variable to receive the subsystem information. This area must be large enough to accommodate the information specified.
The length of the receiver variable. The length must be at least 8 bytes. If the variable is not long enough to hold the subsystem information, the data is truncated.
The format of the subsystem information. You can use this format:
| SBSI0100 | Basic subsystem information. For details, see SBSI0100 Format. |
| SBSI0200 | Multiple subsystems information. For details, see SBSI0200 Format. This format name must be specified if *ACTIVE is specified in the first 10 characters of the qualified subsystem name or if the number of qualified subsystem names parameter is greater than 1. |
An array of CHAR(20) values giving the names of the subsystems about which to retrieve information and the library in which the subsystem description is located. The number of qualified subsystem names parameter specifies how many elements are in this array.
The first 10 characters contain the subsystem name. You can use the following special value for the subsystem name:
| *ACTIVE | Return information about all active subsystems.
If *ACTIVE is specified for the first 10 characters:
|
The second 10 characters contain the library name. You can use one of these special values for the library name:
| *CURLIB | The job's current library |
| *LIBL | The library list |
If *ACTIVE is specified in the first 10 characters, the value in the second 10 characters must be blank.
If information for a subsystem description is requested more than once in the array, the receiver variable will not contain duplicate information for that subsystem description.
The structure in which to return error information. For the format of the structure, see Error Code Parameter.
The number of names specified in the qualified subsystem name parameter. If this parameter is not specified, the number of names specified defaults to 1. If this parameter is specified, the number specified must be in the range 1 to 65535. If a number greater than 1 is specified, SBSI0200 must be specified for the format name parameter.
The following table shows the information returned in the receiving variable for the SBSI0100 format. For a detailed description of each field, see Field Descriptions.
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Bytes returned |
| 4 | 4 | BINARY(4) | Bytes available |
| 8 | 8 | CHAR(10) | Subsystem description name |
| 18 | 12 | CHAR(10) | Subsystem description library name |
| 28 | 1C | CHAR(10) | Subsystem status |
| 38 | 26 | CHAR(10) | Sign-on device file name |
| 48 | 30 | CHAR(10) | Sign-on device file library name |
| 58 | 3A | CHAR(10) | Secondary language library name |
| 68 | 44 | BINARY(4) | Maximum active jobs |
| 72 | 48 | BINARY(4) | Currently active jobs |
| 76 | 4C | BINARY(4) | Number of storage pools defined |
| Offsets vary. These five fields repeat, in the order listed, for each pool defined for the subsystem. | BINARY(4) | Pool ID | |
| CHAR(10) | Pool name | ||
| CHAR(6) | Reserved | ||
| BINARY(4) | Pool size | ||
| BINARY(4) | Pool activity level | ||
The following table shows the information returned in the receiving variable for the SBSI0200 format. For a detailed description of each field, see Field Descriptions.
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Bytes returned |
| 4 | 4 | BINARY(4) | Bytes available |
| 8 | 8 | BINARY(4) | Offset to first subsystem entry |
| 12 | C | BINARY(4) | Number of subsystem entries returned |
| 16 | 10 | BINARY(4) | Size of a subsystem entry |
| 20 | 14 | CHAR(*) | Reserved |
| Offsets vary. These fields repeat, in the order listed, for each subsystem. | CHAR(10) | Subsystem description name | |
| CHAR(10) | Subsystem description library name | ||
| CHAR(12) | Subsystem extended status | ||
| BINARY(4) | Maximum active jobs | ||
| BINARY(4) | Currently active jobs | ||
| CHAR(10) | Subsystem monitor job name | ||
| CHAR(10) | Subsystem monitor job user | ||
| CHAR(6) | Subsystem monitor job number | ||
| CHAR(50) | Subsystem description text | ||
| CHAR(*) | Reserved | ||
Bytes available. The total length of all data available.
Bytes returned. The length of the data actually returned. The number of bytes returned is always less than or equal to both the number of bytes available and the receiving variable length.
Currently active jobs. The number of jobs currently active in the subsystem. This number includes held jobs but excludes jobs that are disconnected or suspended because of a transfer secondary job or a transfer group job. If the subsystem status is *INACTIVE, this number is 0.
Maximum active jobs. The maximum number of jobs that can run or use resources in the subsystem at one time. If the subsystem description specifies *NOMAX, indicating that there is no maximum, this number is -1.
Number of subsystem entries returned. The number of subsystems for which entries are returned. This number determines how many times the entire set of fields describing a subsystem is repeated.
Number of storage pools defined. The number of storage pools defined for the subsystem. The maximum number of storage pools for a subsystem is currently 10. This number determines how many times the pool ID, pool name, pool size, pool activity level, and reserved fields are repeated. Those five fields are repeated as a group for each pool defined for the subsystem.
Offset to first subsystem entry. The number of bytes from the first byte of the receiver variable to the information for the first subsystem.
Pool activity level. The maximum number of jobs that can be active in the pool at one time. If the pool name indicates a system-defined pool, the number returned is 0.
Pool ID. The pool ID for the subsystem pool.
Pool name. The name of the subsystem pool. If the pool is user-defined, the value of this field is *USERPOOL. If the pool is system-defined, the value is one of these names:
| *BASE | The system base pool, which can be shared with other subsystems. The QBASPOOL system value defines the base pool's minimum size. The base pool contains all main storage not allocated to other pools. The QBASACTLVL system value defines its activity level. |
| *INTERACT | The shared pool used for interactive work. |
| *NOSTG | No storage size or activity level is assigned to this storage pool. |
| *SHRPOOL1-*SHRPOOL60 | Shared pools. |
| *SPOOL | The shared pool for spooling writers. |
The Change Shared Storage Pool (CHGSHRPOOL) command specifies the size and activity level of shared pools.
Pool size. If the pool name is *USERPOOL, the amount of storage, in kilobytes, that the pool attempts to allocate. If the pool has any other name, the value of this field is 0.
Reserved. An ignored field.
Secondary language library name. The name of the subsystem's secondary language library.
Sign-on device file library name. The name of the library in which the sign-on device file resides.
Size of a subsystem entry. The number of bytes in the entry for a subsystem.
Subsystem description library name. The name of the library in which the subsystem description resides.
Subsystem description name. The name of the subsystem about which information is being returned.
Subsystem description text. The text description of the subsystem description. The field is blank if there is no text description.
Subsystem extended status. Possible values that can be returned for subsystem extended status are:
| *ACTIVE | The subsystem is running. |
| *ENDING | An ENDSBS command has been issued for the subsystem or an ENDSYS command has been issued, but the subsystem is still running. |
| *INACTIVE | The subsystem is not running. |
| *RESTRICTED | An ENDSBS command for the controlling subsystem, an ENDSYS *ALL command, or an ENDSYS command has placed the controlling subsystem in a restricted condition. |
| *STARTING | A STRSBS command has been issued for the subsystem, but it is still in the process of being started. |
Subsystem monitor job name. The name for the subsystem monitor job as identified to the system. The field is blank if the subsystem extended status field is *INACTIVE.
Subsystem monitor job number. The system-assigned number for the subsystem monitor job. The field is blank if the subsystem extended status field is *INACTIVE.
Subsystem monitor job user. The name of the user profile under which the subsystem monitor job is running. The field is blank if the subsystem extended status field is *INACTIVE.
Subsystem status. Possible values that can be returned for subsystem status are:
| *ACTIVE | The subsystem is running. |
| *INACTIVE | The subsystem is not running. |
| Message ID | Error Message Text |
|---|---|
| CPF1605 E | Cannot allocate subsystem description &1. |
| CPF1606 E | Error during allocation of subsystem &1. |
| CPF1607 E | Previous request pending for subsystem &1. |
| CPF1608 E | Subsystem description &1 not found. |
| CPF1619 E | Subsystem description &1 in library &2 damaged. |
| CPF1835 E | Not authorized to subsystem description. |
| CPF187A E | List of active subsystems not available. |
| CPF1877 E | Incorrect format specified. |
| CPF1878 E | Library name not valid for subsystem &1. |
| CPF3CF1 E | Error code parameter not valid. |
| CPF3CF2 E | Error(s) occurred during running of &1 API. |
| CPF3C21 E | Format name &1 is not valid. |
| CPF3C24 E | Length of the receiver variable is not valid. |
| CPF3C3A E | Value for parameter &2 for API &1 not valid. |
| CPF3C90 E | Literal value cannot be changed. |
| CPF8122 E | &8 damage on library &4. |
| CPF9807 E | One or more libraries in library list deleted. |
| CPF9810 E | Library &1 not found. |
| CPF9820 E | Not authorized to use library &1. |
| CPF9830 E | Cannot assign library &1. |
| CPF9872 E | Program or service program &1 in library &2 ended. Reason code &3. |
| Top | Work Management APIs | APIs by category |