You must coordinate the communications configuration parameters between the iSeries™ server and the 5494 controller connected by frame relay. A description of the parameters are in the following table. Then, related fields and subfields from the 5494 configuration display and the iSeries configuration value and the matching 5494 value. You can coordinate these values automatically or manually. Pick one of these ways:
For more information about configuring the 5494, see these books:
| iSeries Prompt | iSeries Parameter | 5494 Field | 5494 Subfield | iSeries Value | 5494 Value | Notes |
|---|---|---|---|---|---|---|
| Local adapter address | ADPTADR | H1 | 5 | - | - |
Values specified in the iSeries line description (CRTLINTRN command) and for the 5494 Remote Controller Unit must match. |
| LAN remote adapter address | ADPTADR | 15 | - | - | - | Values specified for the iSeries CRTCTLAPPC command and for the 5494 Remote Control Unit must match. |
| Local location name | LCLLOCNAME | H1 | 1 | - | - | Values specified for the iSeries CRTCTLRWS command and for the 5494 Remote Control Unit must match. |
| Link type | LINKTYPE | AA | - | *LAN | 4 | 5494 configuration values must match the
values specified for the LINKTYPE parameter on the CRTCTLAPPC command. For
APPC controllers that specify LINKTYPE(*SDLC), the value specified in the
5494 configuration must be compatible with the physical interface (INTERFACE
parameter) specified on the CRTLINSDLC command.
Select 4 for the network connections. |
| Remote control point name | RMTCPNAME | 13 | - | - | - | Values specified for the iSeries CRTCTLAPPC command and for the 5494 Remote Control Unit must match. |
| Remote network identifier | RMTNETID | 11 | 3 | - | - | Values specified for the iSeries CRTCTLAPPC and CRTCTLRWS commands and for the 5494 Remote Control Unit must match. |
| Remote location name | RMTLOCNAME | 12 | - | - | - | Values specified for the iSeries CRTCTLRWS command and for the 5494 Remote Control Unit must match. |