Work with Service Agent (WRKSRVAGT)

Parameters

Keyword	Description	Choices	Notes
TYPE	Type	SRVINF, EVENT, PRBLOGE, THRESHOLD	Required, Positional 1
CATEGORY	Category	ALL, DASD, TAPE, PROC	Optional
STATUS	Reporting status	ALL, PENDING	Optional
OUTPUT	Output	, PRINT	Optional
COLSRVINF	Collect information	YES, NO	Optional
SNDSRVINF	Send information	YES, NO	Optional
SRVINF	Service information	Values (up to 9 repetitions): Character value, *ALL	Optional
PRBID	Problem identifier	Character value, *ALL	Optional
SRVINFPRB	Information for a problem	ALL, PRIMARY, *SECONDARY	Optional
PERIOD	Period	Element list	Optional
	Element 1: Start time and date	Element list
	Element 1: Start time	Time, *AVAIL
	Element 2: Start date	Date, BEGIN, CURRENT
	Element 2: End time and date	Element list
	Element 1: End time	Time, *AVAIL
	Element 2: End date	Date, END, CURRENT
ORIGIN	Originating system	Element list	Optional
	Element 1: Network ID	Communications name, ALL, LOCAL
	Element 2: Control point name	Communications name, ALL, LOCAL
SRVID	PMR number	Character value, *ALL	Optional
SRVAGTONLY	Service Agent only	NO, YES	Optional
SUBTYPE	Subtype	SYSREFCDE, TABLE	Optional
DEVICE	Device	Character value	Optional

Top

Type (TYPE)

Specifies the area of Service Agent you want to work with.

This is a required parameter.

*EVENT: The results of the product activity log analysis performed by Service Agent are displayed. During PAL analysis, Service Agent groups product activity log records by device, system reference code, and date. Specifying TYPE(*EVENT) will display information about each such group of product activity log records, how many records make up the group, and what action Service Agent took for each record.
*SRVINF: The process of collecting and sending service information to IBM is started immediately.
*PRBLOGE: Provides a customized front end to the WRKPRB command. It exposes only the service related parameters of WRKPRB to make problem determination easier for service personnel.
The Work with Problems (WRKPRB) command works with the Work with Problems display. You can use this command to work with problems that were detected by the system or logical partition or detected by the user.
*THRESHOLD: Specifies to work with either a system reference code in the Service Agent threshold table, or the entire table.

Category (CATEGORY)

Specifies the category of device for which Service Agent product activity log analysis information is displayed.

Note: This parameter is valid only when TYPE(*EVENT) is specified.

*ALL: Product activity log analysis information is displayed for all devices on the system or logical partition.
*DASD: Product activity log analysis information is displayed for direct access storage devices only.
*TAPE: Product activity log analysis information is displayed for all magnetic, optical, and diskette storage devices.
*PROC: Product activity log analysis information is displayed for all devices except storage devices.

Reporting status (STATUS)

Specifies whether the Service Agent product activity log analysis information to be displayed should be limited to currently active information only.

Note: This parameter is valid only when TYPE(*EVENT) is specified.

*ALL: All applicable Service Agent product activity log analysis information is displayed.
*PENDING: Only Service Agent product activity log analysis groups that could potentially cause Service Agent to notify the users and service provider of a new system or logical partition problem are displayed. Such groups represent product activity log information that Service Agent will use to report a problem if additional product activity log records that belong to the group are encountered.

Output (OUTPUT)

Specifies where the output from the command should be directed.

Note: This parameter is valid only when TYPE(*EVENT) is specified.

*: The output is displayed for interactive jobs or printed with the job's spooled output for non-interactive jobs.

*PRINT: The output is printed with the job's spooled output.

Collect information (COLSRVINF)

Specifies whether system or logical partition information is to be collected.

Note: This parameter is valid only when TYPE(*SRVINF) is specified.

*YES: System or logical partition service information is to be collected.
*NO: System or logical partition service information is not to be collected.

Send information (SNDSRVINF)

Specifies whether the available collected service information is to be sent to IBM.

Note: This parameter is valid only when TYPE(*SRVINF) is specified.

*YES: The available collected service information is sent to IBM.
*NO: The available collected service information is not sent to IBM.

Problem identifier (PRBID)

Specifies the problem identifier of the problem selected. Problems with different system or logical partition origins can have the same identifier. This parameter can be used with the Originating system (ORIGIN) parameter to select a single problem from a particular system or logical partition origin.

Note: This parameter is valid only when TYPE(*PRBLOGE) is specified.

*ALL: All problem identifiers are selected.
character-value: Specify the problem identifier of the problem being selected.

Information for a problem (SRVINFPRB)

Specifies the type of service information sent for the problem specified in the Problem identifier (PRBID) parameter.

Note: This is a required parameter when SRVINF(*PRBID) is specified.

*ALL: All service information for the specified problem is sent.
*PRIMARY: Only the primary service information is sent.
*SECONDARY: Only the secondary service information is sent.

Period (PERIOD)

Specifies the period of time for which problem log entries are shown. This is the time when the problem log entry was placed in the log.

Note: This parameter is valid only when TYPE(*PRBLOGE) is specified.

Element 1: Start time and date

Element 1: Start time

*AVAIL: The logged data that is available for the specified start date is shown.
time: Specify the start time for the specified start date indicating the logged data to display, in the job time format.

Element 2: Start date

*BEGIN: The logged data from the beginning of the log is shown.
Note: If *BEGIN is specified, any time value other than *AVAIL for start time is ignored.
*CURRENT: The logged data for the current day from the specified start time through the end time (if it is specified) is shown.
date: Specify the start date for which logged data is shown, in the job date format.

Element 2: End time and date

Element 1: End time

*AVAIL: The logged data that is available for the specified end date is shown.
time: Specify the end time for the specified end date for which logged data is shown, in the job time format.

Element 2: End date

*END: The last day on which data was logged is the last day for which logged data is shown.
Note: If *END is specified, any time value other than *AVAIL for end time is ignored.
*CURRENT: The logged data for the current day from the specified start time through the end time (if it is specified) is shown.
date: Specify the end date for which logged data is to be shown, in the job date format.

Originating system (ORIGIN)

Specifies that only problem log entries that originated at the specified systems or logical partitions are shown.

Note: This parameter is valid only when TYPE(*PRBLOGE) is specified.

Element 1: Network ID

*ALL: All entries are shown regardless of the network identifier of the origin system or logical partition.
*LOCAL: Only entries that originated on systems or logical partitions with the same local network identifier as the one defined in the network attributes for this system or logical partition are shown.
communications-name: Specify a network identifier. Only entries that originated on systems or logical partitions with this local network identifier are shown.

Element 2: Control point name

*ALL: All entries are shown regardless of the control point name of the origin system or logical partition.
*LOCAL: Only entries that originated on systems or logical partitions with the same local control point name as the one defined in the network attributes for this system are shown.
communications-name: Specify a control point name. Only entries that originated on systems or logical partitions with this control point name are shown.

PMR number (SRVID)

Specifies whether only problem log entries that have the specified Problem Management Record (PMR) number are displayed. This number is assigned when the problem is reported to IBM Service.

Note: This parameter is valid only when TYPE(*PRBLOGE) is specified.

*ALL: All entries are shown regardless of the PMR number, if any, assigned.
character-value: Specify a PMR number. Only problem log entries that have the specified PMR number assigned are shown.

Service Agent only (SRVAGTONLY)

Specifies whether all problem log entries are to be considered for display or only those that have been processed by Service Agent.

Note: This parameter is valid only when TYPE(*PRBLOGE) is specified.

*YES: Only problem log entries that have been processed by Service Agent will be displayed.
*NO: All problem log entries will be displayed.

Device (DEVICE)

Specifies the device associated with the system reference code in the threshold table.

Note: This is a required parameter when SUBTYPE(*SYSREFCDE) is specified.

character-value: Specify the four-character device type associated with the system reference code. For example, DEVICE(2420) might be specified for a 2420 tape device.